[Washman]

Re: Servis M9412w Module Plug

Hi

They do just burn out due to plug not fitting tight enough.
I always squeeze the other connectors and replace the one that burns out with amp tags.

Mike

[Washman]

Re: AEG LTH57650 TD Melting Elements

Hi

I had the same problem, it took three elements before I had one that worked OK. The first two only lasted about two weeks each.
I could not find any reason for problem as everything tested out OK on the machine.Touch wood the third one is still working OK after4 weeks.

Mike

[Washman]

Re: Indesit WIDL102 error lights. NTC?

Hi

Re the original post ,

quote {I have an Indesit WIDL102 washer dryer which has been very good until yesterday when the machine just seemed to keep filling and the 2 led’s on the right were flashing quickly.}
Surely this is a fill problem ie:- pressure switch or air bottle blocked up if it kept filling.

Mike

[Washman]

Re: servis m6002 going into spin

Hi

Two common faults on these
1– machine goes into spin when switched on and 2–machine totaly dead both mean new main boards.

Mike

[Washman]

Re: servis oven door seal

Hi

Model number is correct

Part no ==420064800 Oven door seal

Mike

[Washman]

Re: commercial ice maker help needed

Hi

If you put “Nice ice n26 ” into Google you will find the distributer

Mike

[Washman]

Re: No spin

Hi

Whats the full model number it should be M**** and serial number. On label just inside door or on filter flap at bottom right of machine.

Mike

[Washman]

Re: Diplomat APM8703-2 Internal dispenser hoses

Hi

720429300 double electro valve pipe connection
398211400 transfer feed pipe
398213800 pipe coupling

Mike

[Washman]

Re: servis washer dryer – soap drawer

Hi

Also the actuators are on a holder that is only push on fit, due to vibration the holder comes loose and needs to be reseated into correct position with a dab of super glue.

Mike

[Washman]

Re: Machine doesnt seem to wash well

Hi

Have you checked the filter is clean

Mike

[Washman]

Re: Powerpoint washer-dryer 1200 IWD – need user manual!!

Hi

Its a Servis made for Powerpoint washer dryer

[Washman]

Re: Bearing Replacement on Hotpoint WM31

Hi

The inner drum has to be removed to access the bearings and seal

Mike

[Washman]

Re: servis d/w M4605S

Hi

What number light from the left is flashing 1 2 3 4 5 and which are constantly on

[Washman]

Re: Wads this door seal fitted the wrong way?

Hi

The door seal is attached to the outer drum so if anything is rubbing it would have to be the inner drum that is out of alignment for some reason ie:suspension or broken drum spider. Its also posible that things you have been washing have caught in the seal and pulled the seal out of alignment.

Mike

[Washman]

Re: Advice on Washer Dryer

Hi

It could be the drain pump thats noisy. is the drum quiet when turned by hand and is there any movement in the drum its self.

Mike

[Author]

Posts