Washman

Forum Replies Created

Viewing 15 posts - 706 through 720 (of 894 total)
  • Author
    Posts
  • in reply to: beko dishwasher #188571
    Washman
    Participant

    Re: beko dishwasher

    Hi

    Read page 11 of user hand book , it deals with this problem and advises on detergent use .

    Mike

    in reply to: Safety shut off valve for New World Series 2 brown hob #188517
    Washman
    Participant

    Re: Safety shut off valve for New World Series 2 brown hob

    Hi

    Are you CORGI registered , if not you need a CORGI registered fitter to carry out any gas repair .

    Mike

    in reply to: Bosch SRS43A02GB/08 dishwasher circ pump #188457
    Washman
    Participant

    Re: Bosch SRS43A02GB/08 dishwasher circ pump

    HI

    Try here http://www.bshappliancecare.com

    Mike

    in reply to: Hotpoint RLA21P – Conpressor? #188418
    Washman
    Participant

    Re: Hotpoint RLA21P – Conpressor?

    Hi

    If its not shutting off , then the problem is the thermostat.

    Mike

    in reply to: smeg error code #188438
    Washman
    Participant

    Re: smeg error code

    Hi

    If its only six months old its still under guarantee so best to call SMEG

    Mike

    in reply to: Diplomat ADP8352 #188382
    Washman
    Participant

    Re: Diplomat ADP8352

    Hi

    It would normally tell you in the user/installation instruction book how to alter top rack height if it is posible.

    Mike

    in reply to: Moffat 3000 Gas Oven #188206
    Washman
    Participant

    Re: Moffat 3000 Gas Oven

    Hi

    As its a gas oven you need a CORGI registered fitter to check condition and carry out any repairs of appliance by law.

    Follow this link http://www.ukwhitegoods.co.uk/modules.p … ic&t=16259


    Mike

    in reply to: Tricity Bendix? #188191
    Washman
    Participant

    Re: Tricity Bendix?

    Hi

    Zanussi / Electrolux

    Mike

    in reply to: Hoover AC178 not spinning #188175
    Washman
    Participant

    Re: Hoover AC178 not spinning

    Hi

    New brushes , but check the armature for wear .

    Unplug and switch off for safety before starting

    Mike

    in reply to: Service fridge M0330S #188170
    Washman
    Participant

    Re: Service fridge M0330S

    Hi

    Whats the problem , fridge temperature is controled by an air flow control thermostat inside fridge compartment , is this working. And is freezer evaporator clear of ice

    Mike

    in reply to: servis door seal #187904
    Washman
    Participant

    Re: servis door seal

    Hi

    Door seal is replacable on fridge section but complete door on freezer section

    Mike

    in reply to: Beko WMA1510S #187880
    Washman
    Participant

    Re: Beko WMA1510S

    Hi

    Hook Spring shows up on Connections as 5031681474069 Item no 340 on drawing and in stock SRP £2.35

    Mike

    in reply to: aeg door problem #187755
    Washman
    Participant

    Re: aeg door problem

    Hi

    No parts shown on TDS

    Mike

    in reply to: Smeg Dishwasher DW 1710E1 #187218
    Washman
    Participant

    Re: Smeg Dishwasher DW 1710E1

    Hi

    Switch is normally open its the anti flood protection it switches the drain pump on and shuts machine down if bottom tray fills with water due to leak or over fill. Service Manuals not availiable to general public.

    Mike

    in reply to: Door hinge for Indesit #187206
    Washman
    Participant

    Re: Door hinge for Indesit

    Hi

    Have a look at Connect Part no MER035764 it is the hinge and its in stock and HNG5297

    Mike

Viewing 15 posts - 706 through 720 (of 894 total)