Washman

Forum Replies Created

Viewing 15 posts - 721 through 735 (of 894 total)
  • Author
    Posts
  • in reply to: Bosch Dryer WTA3204GB #187208
    Washman
    Participant

    Re: Bosch Dryer WTA3204GB

    Hi

    Part no 263110 complete with stats from BSH £85.00 Plus on the web site

    Mike

    in reply to: Door hinge for Indesit #187203
    Washman
    Participant

    Re: Door hinge for Indesit

    Hi

    Have a look at Connect Part no MER035764 its in stock and HNG5297


    Mike

    in reply to: Sharp Jet Convection & Grill #186947
    Washman
    Participant

    Re: Sharp Jet Convection & Grill

    Hi

    Microwaves should only be repaired by an engineer who has the correct test equipment to make sure microwave emitions are within all safety margins . Also the main capacitor in the microwave has enough power to kill even when switched off so be warned . Pro job only

    Mike

    in reply to: BEKO WMA1512W advancing #186931
    Washman
    Participant

    Re: BEKO WMA1512W advancing

    Hi

    The timer will advance after setting on some wash programs, see page 9 of user manual .So that it looks as if it is missing some of the programs.

    Mike

    in reply to: Hotpoint DWF40 not emptying & flashing lights #186811
    Washman
    Participant

    Re: Hotpoint DWF40 not emptying & flashing lights

    Hi

    Did you flush through the drain hose and make sure the outlet to sink trap or stand pipe were clear

    Mike

    in reply to: Samsung SR-L629EV #186669
    Washman
    Participant

    Re: Samsung SR-L629EV

    Hi

    “d” in display means a fridge defrost sensor faulty .

    Mike

    in reply to: samsung washer #186513
    Washman
    Participant

    Re: samsung washer

    Hi

    Door lock at fault Part no DC64-00120E


    Mike

    in reply to: Beko – D 2731 FW- help please.. #186116
    Washman
    Participant

    Re: Beko – D 2731 FW- help please..

    Hi

    Base probably full of water, unplug machine then pull machine out and tip backwards about 45deg , have towels handy , as water will probably come out of base.
    Stop using 3 / 4 in 1 tablets and use the correct amount of powder for this type of machine.

    Mike

    in reply to: Sharp R-895 Microwave/convection Oven…Display Unit #185037
    Washman
    Participant

    Re: Sharp R-895 Microwave/convection Oven…Display Unit

    Hi

    Microwaves should only be repaired by an engineer who has the correct test equipment to make sure microwave emitions are within all safety margins . Also the main capacitor in the microwave has enough power to kill even when switched off so be warned . Pro job only

    Mike

    Washman
    Participant

    Re: Hotpoint Aquarius WMA37 washing machine – drum doesn’t

    Hi

    The Motor is under the wash tub on this model so not as easy as earlier machines with motor in the top of wash tub

    SWITCH OFF AND UNPLUG BEFORE REMOVING ANY PANELS

    Mike

    in reply to: Servis M491 Wash Cycle incomplete #185013
    Washman
    Participant

    Re: Servis M491 Wash Cycle incomplete

    Hi

    Check the capacitor, also might be something in the pump

    Mike

    in reply to: Changing dampers on Hotpoint Aquarius Ultra 9549P #184611
    Washman
    Participant

    Re: Changing dampers on Hotpoint Aquarius Ultra 9549P

    Hi

    All the parts you need will come with the suspension kit part no 1600429
    You will probably need a new door seal if its out of shape part no 1600125

    POWER OFF AND UNPLUG BEFORE STARTING ANY WORK ON MACHINE

    Mike

    in reply to: Servis M9004AL #184480
    Washman
    Participant

    Re: Servis M9004AL

    Hi

    Belt Part no 998035500

    Mike

    in reply to: Blomberg 1501AAA Motor shutting down #184459
    Washman
    Participant

    Re: Blomberg 1501AAA Motor shutting down

    HI

    The magnetic ring should be in one piece , if its broken , motor will not run correctly. It is part of the tacho assembly that controls the motor . Dave will probibly be able to give info on spares

    Mike

    in reply to: Homebrew Beer Cooler #184378
    Washman
    Participant

    Re: Homebrew Beer Cooler

    Hi

    The compressor and system of a chest freezer is not designed to operate at fridge temperatures , posibily valves in compressor have failed. So not pumping at correct pressures.

    Mike

Viewing 15 posts - 721 through 735 (of 894 total)