washtronics

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 288 total)
  • Author
    Posts
  • washtronics
    Participant

    Re: Bosch D/W SMV50C00GB/14 Door Springs + Hinges Part No. P

    never replaced the hinges on these dishwashers, never had any that have bent or damaged…….yet

    washtronics
    Participant

    Re: Bosch D/W SMV50C00GB/14 Door Springs + Hinges Part No. P

    they come as a pair and are modified so the new ones just get pushed into the plastic or gently tapped with a hammer, very easy to fit, part number bsh00754869

    in reply to: HOW FAR WOULD YOU WALK TO A JOB #445359
    washtronics
    Participant

    Re: HOW FAR WOULD YOU WALK TO A JOB

    working in London with more places having residents parking only, I now have a bike and a backpack on my van so park outside the zone and sometimes have to cycle a mile or so with tools and parts in backpack to do the jobs, not many other options available, so have done this for the last 3 years or so

    in reply to: Ohhh Dear parts needed for baumatic BDI631 (wheels) etc #442689
    washtronics
    Participant

    Re: Ohhh Dear parts needed for baumatic BDI631 (wheels) etc

    the basket wheels etc are the same as an indesit/hotpoint old design. try model Di620. these baumatics are built on the same platform as these dishwashers

    in reply to: Zanussi zwg1120k #442065
    washtronics
    Participant

    Re: Zanussi zwg1120k

    looks like in the 3rd picture the front weight has also been removed. there was no other way I could fit the new seal back on again without removing the weight. most other machines the door seal doesn’t need the front panel to be taken off.

    in reply to: Bush Oven not working #434439
    washtronics
    Participant

    Re: Bush Oven not working

    it will be the selector switch, there will be a contact that has melted/burnt out

    in reply to: Statesman XT5 1030 #424437
    washtronics
    Participant

    Re: Statesman XT5 1030

    done loads of them, they are easily done from the front, they have a clamp that is screwed tight and not a spring type

    in reply to: Baumatic door handle kit for bwd12-1 can’t be £40 can it #423694
    washtronics
    Participant

    Re: Baumatic door handle kit for bwd12-1 can’t be £40 can it

    I have had 2 of these kits on order from qualtex since april last year. they are a stock item but never in stock.

    in reply to: bosch 494747 hilight hotplate #421074
    washtronics
    Participant

    Re: bosch 494747 hilight hotplate

    bsh have emailed me wiring diagrams but still not able to figure it out. im going to take off the new element and return it as its not fit for purpose.I wont get involved again, and steer clear of changing ceramic hotplates

    in reply to: LG washer drier #401477
    washtronics
    Participant

    Re: LG washer drier

    is it the main pcb at the bottom or the smaller pcb at the top

    in reply to: beko wmi71641 #399865
    washtronics
    Participant

    Re: beko wmi71641

    how do you enter service mode?

    in reply to: Statesman sold. #395689
    washtronics
    Participant

    statesman

    heard today by a euronics dealer that statesman have been bought by pick a pack distribution? anybody know if its true

    in reply to: Motor switch for a whirlpool 3rleq8033sw2 american dryer #394160
    washtronics
    Participant

    Re: Motor switch for a whirlpool 3rleq8033sw2 american dryer

    it comes with the motor, not available seperatly. you will also need the fan as its impossible to remove from the motor and has to be broken off.

    in reply to: Bosch washing machine door will not lock #393122
    washtronics
    Participant

    Re: Bosch washing machine door will not lock

    could be stuck on child lock. had this a few days ago.

    in reply to: Beko double oven timer #393089
    washtronics
    Participant

    Re: Beko double oven timer

    yes, had to change 2 of these timers recently for same reason, available from connect approx £20

Viewing 15 posts - 1 through 15 (of 288 total)