washtronics

Forum Replies Created

Viewing 15 posts - 241 through 255 (of 288 total)
  • Author
    Posts
  • in reply to: Cannon C60GPC Timer/Clock Display “pulsing” #351130
    washtronics
    Participant

    Re: Cannon C60GPC Timer/Clock Display "pulsing"

    common fault after a few years, new timer is needed or put up with it as it is

    in reply to: Hotpoint BFI620 #351079
    washtronics
    Participant

    Re: Hotpoint BFI620

    heating element

    in reply to: Hotpoint BWD129 washer/Dryer #350739
    washtronics
    Participant

    Re: Hotpoint BWD129 washer/Dryer

    fluff build up on condenser filter, hotpoint modified this filter but still gets blocked, unofficially make holes in mesh filter larger so more air flows through

    in reply to: ADP 8902 #350652
    washtronics
    Participant

    Re: ADP 8902

    probably the toc for the heater has cut out and needs resetting

    in reply to: Qualtex troubles #350638
    washtronics
    Participant

    Re: Qualtex troubles

    i use qualtex for most things and have very few problems, even with oven elements with earth faults after a few months, they credit me back for or replace

    in reply to: Canon Dual oven -gas #350464
    washtronics
    Participant

    Re: Canon Dual oven -gas

    there is a way of making it louder, there are 3 levels, as it is bleeping push the plus button, this will increase the level, you can only alter it when it is beeping

    in reply to: prima (whirlpoool) dishwasher #350462
    washtronics
    Participant

    Re: prima (whirlpoool) dishwasher

    this does not have a pressure switch or a membrane switch, there is a water wheel on the water softener system

    in reply to: AKG006/02 Philips/Wpool Hob – #350262
    washtronics
    Participant

    Re: AKG006/02 Philips/Wpool Hob –

    this part from qualtex will do the job, not exactly the same but good enough dst3572057010 it is £10.76 and in stock

    in reply to: AKG006/02 Philips/Wpool Hob – #350260
    washtronics
    Participant

    Re: AKG006/02 Philips/Wpool Hob –

    yes this is the part number but this hob must be 20 years old, personally i would replace hob with new one

    in reply to: amica gas cooker #347834
    washtronics
    Participant

    Re: amica gas cooker

    yes that is the part so there must be a part number from amica or is it from another manufacturer. can you forward that picture to anne at amica as i have tried to explain to her but a picture is best.

    in reply to: Indesit WIB111 belt keeps coming off #349426
    washtronics
    Participant

    Re: Indesit WIB111 belt keeps coming off

    usually the pulley bolt comes loose, check this or maybe an item of clothing has been trapped between inner and outer drum

    in reply to: Mini dishwasher tablets? #349240
    washtronics
    Participant

    Re: Mini dishwasher tablets?

    can also cause overfoaming and leaks on slimline especially hotpoint/indesit-very common fault

    in reply to: Increased fuel costs #348650
    washtronics
    Participant

    Re: Increased fuel costs

    i also do statesman appliances and they pay £25 extra for changing the bearings-if you knock them out and not change the rear of tank. i was not aware they paid any other extras . let me know if you know otherwise?

    in reply to: Hotpoint FDW80G – AL10 error code. (Heater element) #348501
    washtronics
    Participant

    Re: Hotpoint FDW80G – AL10 error code. (Heater element)

    c00057684 is the correct heater, the other one is for a slimline dishwasher and it is a lower wattage

    in reply to: work wanted in north london/enfield #346768
    washtronics
    Participant

    Re: work wanted in north london/enfield

    can you give details-send pm

Viewing 15 posts - 241 through 255 (of 288 total)