Forum Replies Created
-
Posts
-
Re: masterpart ebay shop
ebay item 110759211034
they revised the price of the item tho, now £6.36, looking at the revisions on it they seem to revise the prices on a regualar basis???
Re: masterpart ebay shop
leavemetogetonwithit wrote:
£5.96 incl. vat and RM 1st class delivery.
Compares with £6.49 ea or £5.99ea if you buy two excl vat excl. delivery had I bought it as trade.
I really don’t quite understand why they do this. It’s not as if the people who buy odds and sods like this off ebay are going to turn into loyal customers.
I pressed the buttons to pay for this at 10.33am Monday. The part was only marked as despatched on Tuesday at 4.49pm according to my emails. It didn’t get here till Thursday. Not brilliant performance on that score. I’d have done better to pay a few pence extra and get it from LM electrical (Taunton, I think) Their stuff always arrives next day.
Were any explanations offered at the meetings?
Mike.
thanks for the tip 😛i was about to order that very handle from connect, coming in at £6.73+ vat + delivery, can get it from MP ebay shop for £4.33 delivered.
Re: bloomberg w/m fault 7 any idears!!!!
85 number comes up in sios, so presume it is indeed a whirlpool, the only F7 ive seen on them is a triac fault on the motor control module
part nubmer is 481221478349, would doulbe check tho as a bit pricey 💡
HTH
Kevin.
Re: hotpoint dw model lft114
have a look for broken wires in door, take of door skin there is a thin bar running across inner door, behind that you will find 1 or more broken wires, could possibly have caused board fault but might just be wires.
Kev
Re: Hotpoint WF100 dead.
job well done then m8, will need to bear that in mind as ive had a few of these faulty.
Re: whirlpool dishwasher adp5540
check the owi (pressure switch in sump)
i think they can give this fault to.
Re: cordless screwdriver
Worx D-LITE™ 12V Drill / Driver £80
bought from b&q really good, has 2 batteries, each one lasts about 10 days of daily use.
has torque settings and is really powerful.
Re: Bosch washer WAE2416SGB Flashing Leds
– Close the door
– Set program selector switch to position 0 (“OFF”)
– Wait two seconds
– Set program selector switch to position 8 (drain)
– Wait until the start LED is flashing. (will take about two seconds)– Wait two seconds
– press and hold Reduce spin speed button
– Set program selector switch to position 9 (wool??)
– Release the “Spin speed” button.Re: whirlpool dishwasher gdp4801 851150415831
F6 is no water intake or machine not detecting any water coming in
F7 is flow meter faulty
both these faults come back to a faulty flow meter/wiring.
zanussi zwf12070w1
No reset machine, Stick the machine in test mode run test, it will reset at end and might work.
If not replace presure switch.
Re: whirlpool dishwasher gdp4801 851150415831
6 flashes is flow meter fault, reed switch on left side of appliance as you look at it from front.
might just need plug cleaned and squeezed a little if not new airbreak or if you can find the part number just the reed switch will be required.
HTH
Kevin.
