admin

Forum Replies Created

Viewing 15 posts - 331 through 345 (of 12,518 total)
  • Author
    Posts
  • in reply to: HBN13N551B/10 Clock #440781
    admin
    Keymaster

    Re: HBN13N551B/10 Clock

    Hi

    If its a clock then by pass the relay and if its the mechanical timer then by pass that switch if the customer does not use the clock or auto timer function.

    Bryan

    in reply to: hoover DYN8144 DIX #440762
    admin
    Keymaster

    Re: hoover DYN8144 DIX

    Yes .. Change the heater

    Bryan

    in reply to: hoover DYN8144 DIX #440760
    admin
    Keymaster

    Re: hoover DYN8144 DIX

    Hi

    Change the heater. simple.

    Bryan

    in reply to: engineers please help..Hoover HDC884X oven thermostat switch #440713
    admin
    Keymaster

    Re: engineers please help..Hoover HDC884X oven thermostat sw

    16 digit serial / product number required please

    Bryan

    in reply to: Samsung RSA1UTMG s/n Y6584ADF601097B #440472
    admin
    Keymaster

    Re: Samsung RSA1UTMG s/n Y6584ADF601097B

    Hi

    Normally a broken fan blade or the defrost heater is not pushed in fully.

    Bryan

    in reply to: Ripped off – Dodgy engineers? #440215
    admin
    Keymaster

    Re: Ripped off – Dodgy engineers?

    Hi

    A plumber will not be able to fit a compressor as it will need a vac pump brazing/lockrings,drier and refrigerant. Dependant on where you live depends the labour and experience of the engineer.

    Bryan

    in reply to: Bosch Electric Hob turning itself off #440600
    admin
    Keymaster

    Re: Bosch Electric Hob turning itself off

    Not sure about the ventilation theory TBH

    .

    Modern hobs require ventilation to protect the boards from over heating and cutting out is a typical symptom of overheating. If it’s fitted without the correct distances it will cut out more often where there is also a built in oven also being used.

    Gone are the days of regulators now its fully electronic.

    Bryan

    in reply to: Bosch Electric Hob turning itself off #440597
    admin
    Keymaster

    Re: Bosch Electric Hob turning itself off

    Hi

    Possible lack of ventilation underneath the hob.

    Bryan

    in reply to: In search of the fourth cord #284879
    admin
    Keymaster

    Re: In search of the fourth cord

    Starting to look like another Martin ..

    Bryan

    in reply to: AEG Clock wont set – AEG B5741-5 #440581
    admin
    Keymaster

    Re: AEG Clock wont set – AEG B5741-5

    Hi K,
    Would it help if I told you it was purchased in June 2008.
    Looking at your numbers, it seems to be a date between the PNC and model number.
    possibly a date of introduction?

    So a logical assumption would make it the first model?
    I suspect the timer replacement is simply a matter of opening the case, and unplugging old module and replacing? if that is the case, might be worth getting hold of a timer?

    Thanks

    in reply to: AEG Clock wont set – AEG B5741-5 #440579
    admin
    Keymaster

    Re: AEG Clock wont set – AEG B5741-5

    Hi Kwatt,

    Ok, PNC is 944 185 452.
    exact model is b5741-5-b
    Typ: 91 AVD 11 GB
    Anything else needed, please let me know

    D

    admin
    Keymaster

    Re: Whirlpool Side by Side WSG5588 Freezer is perfect but fr

    Hi

    If it does not cure it then it’s time to have an experienced engineer in as all the advise given can only go so far without actually testing components and being in front of the appliance.

    Bryan

    admin
    Keymaster

    Re: Whirlpool Side by Side WSG5588 Freezer is perfect but fr

    Hi

    Do you hear the fan running ? You may need to push the light switch in.

    Bryan

    admin
    Keymaster

    Re: Whirlpool Side by Side WSG5588 Freezer is perfect but fr

    Hi

    That channel at the bottom right of the freezer should be clear. defrost the whole of the fridge freezer and leave off for 48 hrs and leave the doors open then restart as normal.

    Bryan

    in reply to: GE Fridge Freezer (PHE25) #440431
    admin
    Keymaster

    Re: GE Fridge Freezer (PHE25)

    Hi

    Normally the ice flap solenoid has corroded due to dispensing ice into glasses of cola instead of cola first. I’ve just done one with the exact same defect.

    There will be snow building up in the ice chute stoping the flap from closing fully.

    Bryan

Viewing 15 posts - 331 through 345 (of 12,518 total)