Forum Replies Created
-
Posts
-
Re: homark ignition switch
micky wrote:Any idea where i can get a new ignition switch for a homark hob. Mine has disintigrated ❗
oops just read this and its misleading. I’m just after the little button thingy and not the whole ignition.
Re: WFF 2001 Bosch Wassher
The machine’s working again now.
I had a look at the wiring and realised that that I could wire both solenoids in parallel. So that whichever one is used it would still do the cold fill. So I got my trusty soldering iron out and bridged the connections. I didn’t need to touch the hot fill at all.
Voilla! it works.
This’ll keep it going until I order a replacement.
I wouldn’t recommend everyone rewiring their machine, but as a trained electrical engineer, I make certain to take the appropriate precautions.
Thanks to all. 🙂
Re: WFF 2001 Bosch Wassher
Hi guys,
It’s exactly as you described. I checked both solenoids with my meter and one of them is open circuit. Now I just need to find a replacement on a Good Friday.
I think I’ll probably swap the hot one around and use it as a cold fill only machine.
Happy Easter
Re: WFF 2001 Bosch Wassher
Question, when you say that there is a double valve, do you mean that the valve is double cold fill or do you mean it has hot and cold in one unit?
I’m going to try to take it apart tomorrow.
Thanks for the info. 😀
Re: Replacement Oven Knobs
Thank you K
Dave will probably be able to tell me which knobs would be suitable? Do I just wait for Dave to write here to give me the info? Thanks again…Maz
Re: creda t/d 37643
i have been back and put the wires back on where you said and it worked
a treat so thanks a lot vey much appreiatedSORRY I’M STILL WORKING THE FREEZER OUT.I’VE FOUND ANOTHER LABEL , MODEL FZ60P. I CAN’T TURN IT ON FOR 24 HOURS , IS THAT RIGHT? WHAT HAPPENS IF I GET A BIT PREVIOUS?
Hi – I am still hear and reading your replies to the various posts on this subject.
Tumble driers aren’t just going to go away because people don’t think that they are environmentally friendly enough.
I wondered if anyone has experience of similar technology step changes in the market. I am thinking in particular of the increase in availability of and decrease in price of frost-free fridge freezers. Five years ago this was the premium technology which was available at the top of the price range, but now it is common place at affordable prices. Can anyone shed light on how this happened?
Thanks – have a good weekend
Re: Indesit WE12 F05 fault code
Had a F-05 Error flashing on the WE13 and managed to remove a baby sock from the pump assembly. Thanks for the posting on this site, just saved a few quid… 😆
Re: Hygena APM8702 – dryer not working
The 1/2 load button was the key to my problems. You saved me the embarassment of calling out an engineer 😳
Thanks a million !!! 😀
Re: NEFF
This sounds exactly like the oven I’ve just purchased! Did you have any luck, and if so can you please tell me where I can get a manual and if not, have you found out what the dials mean?
I’d be very grateful for any help.
Re: Homark built in oven question
😥 Have moved into a new house and have encountered the Homark 02-700301 cooker. Can get the main oven working, but am having no luck with the grill no matter what setting I try, the grill element doesn’t glow. The settings that I have are light (this doesn’t work), a fan setting which I presume is the normal oven, a fan with 3 triangles above it , a fan with 2 triangles (joined together) above it. Can anyone help. What do the settings with the trianges do? I would have thought that one was a grilll?! Maybe the grill is broken?
Sue
Re: Zannussi Aquacyle 1400 fx1465 5 beep/flash end light fau
Apparently you press and hold start pause button and turn program selector clockwise to position one, and the leds will begin to sequence, release the buttons and carry on turning to position 10, this should reveal a fault code.
In my case in position 10 all lights are extinguished.
Hope this is some help.
