admin

Forum Replies Created

Viewing 15 posts - 9,271 through 9,285 (of 12,518 total)
  • Author
    Posts
  • in reply to: indesit wde12 drum not spinning #130023
    admin
    Keymaster

    Re: indesit wde12 drum not spinning

    ok i will come clean, the cause was a huge, heavy indian blanket 😉

    other than all quiet and happy

    cheers

    kenny

    in reply to: Whirlpool fan problem #130080
    admin
    Keymaster

    Re: Whirlpool fan problem

    Thanks for all your replies.
    The number starting 59… is 059040445

    Gill

    in reply to: indesit wde12 drum not spinning #130020
    admin
    Keymaster

    Re: indesit wde12 drum not spinning

    hi all, removed the rear panel, and saw belt was lying at the bottom, refitted and now all okay

    thanks for the help, even remembered to unplug it first!!!

    great web site

    cheers

    kenny

    in reply to: Electrical Problem with a Bosch Dryer WTA 3100 GB/09 #130062
    admin
    Keymaster

    Re: Electrical Problem with a Bosch Dryer WTA 3100 GB/09

    Martin

    Thank you very much for your quick reply. In fact we do operate our dryer in the garage but its not particulary damp. I will take your advice and call an engineer in. However the Bosch engineer is very expensive so hope I can find somebody more reasonable

    Regards

    Charles

    in reply to: kenwood electric oven & hob #122610
    admin
    Keymaster

    Re: kenwood electric oven & hob

    Hi ezman,

    Hope you got your Kenwood package o.k!

    My experience not so good. Hob fine but oven doors out of alignment so cooker has to be replaced. Easy? Not on your life – no stocks available at present – due to popular demand. Currys are the sole supplier of this product. Well, their interactive voice generated customer services system sucks and if you get as far as a real person and ask an awkward question you are cut off mid sentence. Took me 4 hours of calling to advance three sentences.

    Would love to know where these products originate from as they do not seem to exist outside of The Currys Stores. Guess I won’t be shopping there in future!

    Vicki

    in reply to: Whirlpool ADG 994 dishwaher – stuck on drain #120101
    admin
    Keymaster

    Re: Whirlpool ADG 994 dishwaher – stuck on drain

    there is no water in the base, ive taken off the base panel as well now and there doesnt appear to be a sensor there, the start light is flashing constantly, not a set number of times and repeating

    in reply to: electra wd 1100a #129893
    admin
    Keymaster

    Re: electra wd 1100a

    just to verify..yes drum turns etc.. but i could not detect a proper spin cycle, just normal wash rotation.

    in reply to: electra wd 1100a #129892
    admin
    Keymaster

    Re: electra wd 1100a

    pump?..i’m not sure what you mean.. it pumps the water out after the cycle. How do i check pump/drain filter. I bought 2 new hot/cold pipes with little filters on the end..

    in reply to: Hoover six express wdm130 #130059
    admin
    Keymaster

    Thanks iadom & Martin.
    Spot on, i have found a dyson vacum cleaner filter.
    Ever felt stupid ! this could have cost me a minor fortune in a call out.
    Many thanks
    Steve

    in reply to: Whirlpool ADG 994 dishwaher – stuck on drain #120099
    admin
    Keymaster

    Re: Whirlpool ADG 994 dishwaher – stuck on drain

    my machine is also stuck on drain, if i leave it on the start light flashes continuously, ive tried pressing the start button to reset but it just carries on draining, ive taken off the 2 sides and i cant seem to find a sensor to measure water level, if i put water inside it pumps it out immediately, where is this so called flood sensor?, any help would be appreciated, maybe i need a new dishwasher???

    in reply to: Fisher & Paykel question re: diagnostic codes #130051
    admin
    Keymaster

    Re: Fisher & Paykel question re: diagnostic codes

    Hi

    On advice from my father (an electrtical engineer) I connected the connector plugs that attached to the OOB switch, thereby short circuiting the switch.

    The machine now works, which means I can use it until I can get to an electrics store to get a micro switch (cherry electrics).

    Saved myself some money

    Zac

    in reply to: Training #128854
    admin
    Keymaster

    Re: Training

    Ditto….

    I’m chilling today, with beer. Sunday, its tiling the new shower and off to the pub for a couple at lunch time. Monday and Tuesday are days off too seeing as we worked Friday.

    Ukw can manage for a day or so.


    Kevin

    in reply to: leisure rangemaster 55 #130043
    admin
    Keymaster

    Re: leisure rangemaster 55

    Marielle

    We cover your area give us a call on 07961365484

    bryan :wave:

    in reply to: homark ignition switch #130012
    admin
    Keymaster

    Re: homark ignition switch

    Hi Dave

    Have grovelled under the hob and Model no is 02-811124.

    in reply to: NEB Vicenza Mirr oven #129769
    admin
    Keymaster

    Re: NEB Vicenza Mirr oven

    Cheers lads for the help

    The oven is about 18 months old

    I’ll hopefully post you the end result, cos the wife is sick of using the bloody grill… 😳

Viewing 15 posts - 9,271 through 9,285 (of 12,518 total)