Forum Replies Created
-
Posts
-
Re: employment with merloni
My friend who is a hotpoint engineer of long standing…loves the work, HATES MERLONI
kevinRe: INDESIT WG1239TS G drum not moving.
😕 My Indesit WG820 has the same problem. the engineer said it might be the motor packing up. Wanted to take it away, and test in his workshop. No doubt to ring me back and suggest it was the motor and did I want it back!
Then he gets to keep the machine for spares hmmmm.
Re: BOSCH WFL200UK
Do you know if this part will fit in a ENR WFK2401UC/01 FD8002
model machine? The picture looks exactly like what I removed
from the motor.Re: Bosch Dishwasher flooded kitchen
The model si SGS43A32. I have checked the filter and the outlet drain. There is power and as soon as you switch it on the pump is running. It was doing this at 5am this morning. Must have been running all night. From the dishes it looks like it had only done the wash cycle. I have tried the reset button to cancel the program but the pump still runs and it doesn’t matter whether you put it on a wash or a rinse.
The only things I haven’t done it try to run it.
Thanks
Get AEG – they seem to be a reasonable price now. I own both a Bosch and AEG washer and dryer set, and my AEGs score top all over Bosch machines. AEG’s also tend to be more reliable aswell, not to mention have more flexible programming than the Bosch and a bigger drum capacity. However you still can’t go wrong with a Bosch or AEG; I’d just be inclined to go more with an AEG. Try looking at a Lavamat 62600 or 64600 – thes have the same features (if not more) than the WFX Bosch, and at least online are in the £300-£350 price range.
Jon
Re: ariston margherita A1535 noisy
will do, thanks very much.
if it does fail with the same fault within 12 months they will send an engineer free of charge to sort it again. but i’m hoping they can sort it out before we run out of clothes 😳 as i don’t really want to use it until the enginer comes.Re: Indesit users manual, please
I found it ❗ 🙂
But this number isn’t in the list. 😥
There were numbers:
S/N 206250365
46233350101
I’ll try writing them in adress from your FAQ. 😕Re: LG WM-1465FHD
Sorry but if the water is passing through the valve due to electric current going to the valve during spin then you oly have 1 option and that is a new PCB.
the part number for this is a choice of 3 (they are all the same pcb )
6871EC1024R OR 6871EC1024D OR 6871EC1077D
I have one these in stock
hope this helps
bryan
Re: BOSCH WFL200UK
Hello again,
just to say ta for all your comments.
Gonna go for a new machine. Read some of the other threads and looks like another Bosch is on the cards.
This is a top site – nice1 🙂
Re: LG WM-1465FHD
Hi guys,
Thanks for the reponses.
The water does not flow if the machine is switched off. I check to see if the water flows only on spin…
if it is electronics, is there a way of defaulting it? or reseting it??
Thanks again
Charlie
Re: Diplomat ADP 8234 with E3 Heating Problem
Thanks, yes, I realised that there are a number of possible reasons for this Error code. Having read a number of the Diplomat threads posted it is apparent that this could be anything from a Thermostat reset to a element or the control board.
Not really happy with attempting a DIY fix myself, hence the engineer request.
What I am worried about however is ending up with an engineer who can’t diagnose the fault correctly and ends up replacing 3 or more components before solving it as it would end up costing me more than the price of a replacement unit, assuming the prices of nearly £200.00 for a control board that I have seen are accurate.
I’ve seen replacement units for around £500.00, so I really want to weigh up mb options.
Re: COOLfreeze of Northampton
K – thanks.
Dave – thanks. I’m not sure of the details yet, but I believe a rumble from the lower rear of a washing machine suggests bearings. I shall pass on the ‘spare@whitegoods’ to him. I still haven’t got over the fact that you were even able to provide the right length of capillary tube as well as the right ‘stat.
J
