Forum Replies Created
-
Posts
-
‘test’ instead of program requested
My wf840 is going into ‘test’ everytime I try to use a program. How do I cancel this and just get on with using the machine? It is only 6 months old but I am unable to find the manual after searching for it.
Re: Proline oven
This is a Whirlpool built appliance. Suggest you pm Johnmac11 who will be able to help you with the part nos.
Kevin
Re: BOSCH WFL200UK – should be WFL2000UK
Hi all.
cannot identify motor, or find a rating plate at any rate. Had a quick search on numbers found but…
Two cast ally sections with laminate (iron?) in middle…
Numbers found: 5500 000260 (dot matrix print/etch/burn) on pulley end, plus 220/240 50Hz info.
Castings have (pulley end) 129.600104 (read with mirror) and (bearing end) 129. 60102 as part of cast (probably no use)
Any ideas would help.
Thanks
Re: Philco Manual
Program numbers for PHILCO WASHING MACHINE/DRYER (model number:WD1009SE).
1 90 deg whites with pre-wash 40 degs.
1 60 deg whites with pre-wash 40 degs2 90 deg whites without pre-wash
2 60 deg whites without pre-wash3 60 deg fast colours without prewash
4 40 deg fast colours without prewash8 60 deg synthetic with prewash 40 degs
9 60 deg synthetic without prewash10 50 deg synthetic without prewash
11 40 deg delicate colours
14 40 deg wool wash5 deep rince
6 softeners
7 normal spin
12 delicate rince
13 delicate spinThanks for the advice! Now that Xmas is over I need to get on with fixing it – or not. One view that has been expressed to me is “don’t waste your time with a 5 year old machine, new machines are cheap and other things will go wrong so just run it till it breaks”. Is this a sensible view? The machine has been very good, works well and seems to me worth fixing. Are they generally considered reliable?
A decision is needed soon so I would appreciate any views on this!Alan
Re: 120 Volt pump
Simple modification can be done on this to use a standard 240v pump.
Go to maplins or rs components and get a 110v relay this wired in will supply the neccasery 240v to new pump.
job done
as long as it isnt under warranty and labeled you shouldnt have a problem.
bryan
Re: AEG oko lavamat washer, error F9
Thanks for your reply Dave.
I actually tried to track down the part in my local area but have run out of time. I was told AEG don’t list brushes as a separate orderable item for my serial number machine – 605.649 123
By the time I’d have got around to taking the photo and uploading I’d have lost more time so……..The engineer is here today. I’ll see how it goes. Rumour has it they may insist I change the whole motor – if so I’ll be back following up your request, thanks!
Re: Replacement glass for philips series 90 built in Oven
Thanks for trying. Is there any other material that is safe to use in place of the inner glass? (ie so that we can use the oven, even if we cant see inside without opening?)
We plan to change kitchens later this year so only a temprary (but safe) use is required until we know what we will be buying.Al
Re: Whirlpool AKP 510 oven door inner glass coming adrift
Thanks Dave. Will try that this weekend, as inner glass has now fallen out completely.
Re: Scandinova fridge freezer went bang – need new circuit b
Thanks for taking the time to look into this Dave, much appreciated.
Cheers
Dave
Re: BOSCH WFL200UK
Nice1 Penguin,
I should have corrected my subject to WFL2000UK but guess you knew that…
Will look into and let you know.
🙂
Re: Scandinova fridge freezer went bang – need new circuit b
Hi, the numbers on the boilerplate are:
Type – FF6745D
Serial – 91704681Dont know what these are but I’ll include them:
BNKF332
0-S332.B10-62010150
Cheers
Dave
