Forum Replies Created
-
Posts
-
Re: Delonghi Range Cooker DFS901
Probably unrelated, but Its worth checking terminal block , rear left, they have a tendancy to melt, worth a look anyway.
Re: Smeg DWI710E1, No Action
When u check pcb look for burn outs on edge connectors, as they have a tendancy to frazzle.
Re: Zanussi WJS1265W washing machine
roly16 wrote:Hi Gegsy,
Thanks for that. I’ll let you know what transpires.
GeoffNo probs Geoff, good luck
Re: Zanussi WJS1265W washing machine
Dave_Conway wrote:gegsy, where the hell did you get that avatar ? :rotl:
Dave.
You never met the misses dave lol 😳
Re: Zanussi WJS1265W washing machine
I had a fault on a similar machine. It would lock the door, briefly fill then unlock the door. Same fault code too and I did check pressure hoses, all were ok. Changed main module ( you will need coding sheet if not pre coded); and all worked fine. Hope that helps. 😉
Re: FRIDGE SEAL – Where to buy replacement?
where can I buy a new magnetic seal for a Zanussi ZCX 78/31 /A fridge freezer – I need the freezer one. email kevin.strong@24x.com
thanksRe: CDA BUILT IN OVEN
hi dave ,
this is probs 062057004 but i don’t recognise it myself. If however its the ultra small one I have one in stock you can supply.
Kevin
Re: Bosch SGS5302GB not pumping out
Has now happened for the second time on me to the same dishwasher.
Cured on calling out the engineer who replaced the Control Module (PCB)
behind the front panel (when under guarantee). The module costs around £90-£110, so does not seem worth replacing – unless of course some bright spark out there can work out which component on the PCB controls the drain cycle. Then it’s pennies to fix!As this is a definately a design problem on this model, Bosch should do the honourable thing and supply a replacement part.
Re: Replacement door seal for unknown make of fridge
O.k., thanks for that. If no-one else has any ideas I’ll try a universal type door seal. Any suggestions where I can buy one?
I tried Ezee-fix before Xmas but they don’t do them anymore.
Ros
Re: Which zanusi/bosch/ aeg condense dryers hav waste water
Thanks for everyone who has replied.. especially DAVE
I was specially looking at the WTL 6307 because it has a sensor. Now I don’t know how good these sensors are…. but WHiCH? says they are great.
Beside being a lazy single bloke I will always forget to turn it off.
Second point of note is that at least I see I can order spare via BOSCHAPPLICANCES.CO.UK so that will be ok for the optional extra….
In relation the the last post about the “Gorenje” well I’ve never heard of it. But willing to look if it has a SENSOR….From memory I could only find Siemens, Bosch and MIELE who have sensors….
Sorry I never touch indesit, hover, candy…..
Hi Dave ( & Kevin too)
Thanks for the tips – the front does slide out just like you say and I am in the process of giving it a good clean.
Adhesive wise – is it best to put glue on one or both surfaces before assembling, and do you need to wait until tacky before mating both surfaces?
Cheers
Taffman
(the Welsh Git)Re: Replacement door seal for unknown make of fridge
Thanks for the prompt reply Dave. Hope this is of some use to you:-
Ersatzellindex B
Klasse N
Netzspannung 220V 50Hz
Nennaufnahme 140W
Kaltemittel R12 0.085Kg
Kaltesystem Kompressor
Bruttoinnalt 238 L
Betriebsubarduck Saugs. 12 bar
Drucks. 40 barDichtheit gebruft
Nr.
1301868All this info is on a paper label near the bottom of the left side fridge wall in the area of the salad tray. Most of the info is clearly legible but I’m not certain of the final 7 figure digit – the 8’s could possibly be 9’s.
Good luck with that! Thanks, Ros
my boyfriend has moved into a rented house.
the washing machine that is there is a quattro 1100 AB.
Neither of us have a clue how to work it!
I have been on the hoover website and even called gias, but have never got through. can you help me?
i would be extremely gratefull if you could just tell me how to use the machine on a standard 40c wash!
Thanyou Vicki
