Forum Replies Created
-
Posts
-
Re: amica 7kg 1200 spin
Is this a chinese built M/c similar to the Zanussi (little swan) ?
If so e62 is speed feedback abnormality.Re: Qualtex part numbers
If you put the Qualtex ENQ number into the search on the Qualtex website it gives you the part number anyway.
Re: S’now joke
Treked out into the pennines yesterday to an “urgent” call, candy cic60 dryer with no heat. Customer insisted I take a heater with me as she couldnt take any more time off work. So i duly order heater assy to take with me and battle through the snow 😡
I got as near as possible then left the van to walk the remaining distance. When I got to the door I was greeted by her husband who obviously hadn’t made it into work, the lady herself was nowhere to be seen 😕
Anyway luckly the heater was the problem and I fitted the new one, did my tests and billed the customer for £70 8) Customer now has a pained expression, ” £70 how do you justify that ” he says and then moans about the wife not going to be happy !
Don’t know why I bother.Allan.
Re: Work from letting agent in Bedford area.
It’s the same Zoe Tim. I’ll pass on your comments and she can contact you if need be via your website 😉
Allan.
Re: hotpoint bwm129(integrated)
I think you can get away with using a zanussi gaitor spring on these instead.
Re: whirlpool ADG7561 spray arms not turning
I went to a similar M/c late yesterday & had a scout around inside, I’m pretty sure the seal is from under rinse aid cover.
I did a search on the spray arms not turning and found some mentions of the feed pipe to the upper spray arm becoming detached at the sump but would this effect the lower arm as well ?Allan.
Re: whirlpool ADG7561 spray arms not turning
Had a quick look at this, main pump seems to run but no rotation on spray arms. Also don’t know what this seal is she’s found lodged in the top spray arm 😕
Help ?
