[Allsorts]

Re: Lg wd door not unlocking

either that .. or if you have separate wires that connect to the board/pressure switch.. make sure you haven’t put them on in reverse order

George

[Allsorts]

Re: Bush WQP8-9347

Connect distribution do parts for bush

[Allsorts]

Re: Lg wd door not unlocking

The lock itself then… I would assume a short within the lock.. There is no real way of testing this other than to use a wiring diagram and do voltage and continuity tests.

George

[Allsorts]

Re: Lg wd door not unlocking

Check pressure switch and tube

[Allsorts]

Re: LG Bearing

They are a doddle and I’ve never used a puller yet

[Allsorts]

Re: Removing torx screws from drum spider – Hotpoint

Thanks

[Allsorts]

Re: Removing torx screws from drum spider – Hotpoint

Maybe it is because I am on mobile.. What is the RS ref number?

[Allsorts]

Re: Removing torx screws from drum spider – Hotpoint

That link doesn’t work

[Allsorts]

Re: September Meeting 2013

Phone numbers 02476 841016 or 02476 841018

[Allsorts]

Re: WMA 64 1600 ULTIMA

Try the door lock.. also look at the plug for the door lock to make sure it is not tracking

[Allsorts]

Re: Hotpoint washer dryer problem.

Short answer to the question is NO. As Hotpoint have seen fit to replace the machine then you have no further responsibility under the sales contract.

George

[Allsorts]

Re: Bosh WAP28360GB/01 bearing job

Use the EU ruling (1999/44/EC) if you don’t have the guarantee and the machine is under two years old.

George

[Allsorts]

Re: Happy Birthday Greetings here!!

Wipper snapper – happy birthday UKW

George

[Allsorts]

Re: Indesit WD10 filling problem

Check and change faulty fill valves

[Allsorts]

Re: Pressure Switch for Hotpoint WMA58S washing machine

Normally if it is the alternative to the original then the replacement should just plug directly in.

[Author]

Posts