Forum Replies Created
-
Posts
-
Re: Zanussi ZWG1140M – Pump rattle
iadom wrote:Grrr, this thread is full of it.
Unicron Poo does not mean rubbish
I expect better from my learned friends. :bang:
Driving you to distraction is it Jim.. Rather than Unicorn Poo you are now calling it Unicron Poo so that you psychologically have no need to hear the phrase…Although, what you say is correct… Unicorn Poo is the same as Rocking Horse Shit… and both mean Rare as Hell
Re: Bosch Classixx 1200 Express
The mains suppressor is inside the appliance at the end of the mains cable
Re: Hotpoint WDL540G issues.
Steve, try replacing the caps on the board.. but more importantly change the MKP caps at the boards input. It sounds like the board is losing power at source end.
Re: 680uf 10v capacitors
I get mine, together with other values, from ebay Jim
Cheap cost.. postage inclusive
Re: help zanussi cooker 948904019 model zcv665mw
Yes, I’ve just looked on TDS and cant see the latch and catch parts either
Re: Belling 6060C WH cooker control panel tube.
Flickering/flashing is indicative of a bad power supply, try taking the supply from an equivalent power source to test everything past the normal source; if everything is ok on that, then it has to be the source board.
Re: How long is the guarantee
Max warranty you’ll get from a manufacturer when buying parts is 12 months
Re: One for the Bosch Neff engineers – wiring diagram needed
Not been able to get past the answer phone for the past few days
