Forum Replies Created
-
Posts
-
Re: hoover t/d
Yes… Small PCB… You will need to repair it or change the board…
If you change the board send me the old one and I’ll see if I can do some diags on it for future ref’.
Re: SIMPLE PCB REPAIR TIPS
Item Description: Indesit Relay PCB
Item Part numbers: 1702778, 1703290, C00112205, C00207999
Make & Model affected: Hotpoint VTD, Indesit IS60, Proline TDV & SLE
Symptom: Start button depressed allows the machine to work but when released the machine stops because the Relay PCB is not operating. This is also evident by watching the connection side of the switch where a spark will be seen when the Start button is released.
Repair: Replace D2 (1N4749A) and C1 (47mf 50v 85degs)
😛
Re: T V Licence
kladave wrote:It appears i’m going to get a visit from the enforcement division because i don’t have a tv licence and i own one of the following
Business pc
Laptop
Mobile phone
These people are having a laugh,when do i get time to watch a tv programme at work 😕
any advise would be most helpful.
Dave
I too got a notice like that… I just ignored it… Although I sell tv’s and computers I do not have a digital signal coming into the building and the equipment wont receive their programs without a digital signal anymore… Tell them to F/O as I did… Not heared anything since.
George
Re: UKW Monthly Insurance
That’s great K… Thx for all that hard work… Don’t suppose we can get something similar to sell with our used machines?
George
Re: zanussi zwf1211 wont stop filling. ❗ scratch head ❗
Have you checked which of the wires is providing a possitive feed to the inlet valves and then trace it back to make sure that it is not receiving a supply from an alien source?
Re: zanussi zwf1211 wont stop filling. ❗ scratch head ❗
Have you checked that the electrics are actually switching on the P/S using a continuity tester
“Make sure you switch off the power first”
Re: zanussi zwf1211 wont stop filling. ❗ scratch head ❗
Is the P/S making the appropriate clicking sounds as you blow into it .. ie. 1, 2, or 3 clicks as it is staging
Re: A real pain in the neck.
Sorry to hear about you neck probs.. I have experienced that in the past… not nice at all. I had pulled a muscle in the side of my neck and was intermittantly in spasm for a week and a half.
Re: AWO/D4504 fault codes
Chris, can you send me some info too… I have one with the same problem… Cheers George
Re: Parts identification CD’s
is that what I am looking for?… I need a cd that when I type a model in I get back a list of the parts on that machine.
