Forum Replies Created
-
Posts
-
Re: Siemens SR65T080GB/01 (D/W) slimline
I think they are different strength springs for the different door weight. Alan
Re: Bosch WVH28420GB pump hairy problem
Would connect pmp998 fit?? Looks similar but not listed as alternative. If it would its a lot cheaper and an askoll pump so may be more reliable plus if it goes again you can just replace the motor. Alan
Re: Fitting Bosch dishwasher aquastop water inlet to water s
It just screws on to a standard washing machine tap!!! I don’t get what the problem is??
Re: John Lewis d/w
If it’s a built in make sure the door is closing ok and tha the cabinet door isn’t catching some where. I also had an AEG where the cabinet door was bowed and caused a leak at the door seal
Re: Bosch Dishwasher Heat Pump failed prematurely
Perhaps it’s to stop the groaning noises when its washing & nothing to do with heater failure. I know it’s an old chestnut-but why are these companies so secretive about tech info?? We just have to guess most of the time.
Re: Bosch Dishwasher Heat Pump failed prematurely
Could it be the plastic trim/baffle that clips into the sump that I mentioned in the other thread running about heat pumps?
Re: Bosch heatpumps failing on install,is it just me??
Fitted one to a Siemens last week and in with the pump was a new plastic baffle that clips into the sump by the pump inlet. Looked the same as the old one but wondered if its to help water flow.
Re: neff warming drawer
I think I’m right in saying it senses when the drawer plugs in to a socket at the back. Check that the front isn’t bent forwards so the top of the drawer hits before the bottom. Or could be dodgy plug/ socket.
