bazza500

Forum Replies Created

Viewing 15 posts - 331 through 345 (of 1,916 total)
  • Author
    Posts
  • in reply to: ISDAL In Administration? #381756
    bazza500
    Participant

    Re: Independent Service In Administration?

    Legally as the retailer you are ultimately responsible for any warranty on any product you sell, however JTM do Haier under warranty.

    in reply to: Whirlpool interlock #381844
    bazza500
    Participant

    Re: Whirlpool interlock

    The number I gave does supersede to the one Don links to.

    in reply to: Whirlpool interlock #381840
    bazza500
    Participant

    Re: Whirlpool interlock

    481969018108

    in reply to: Servis M9503W washer-dryer dead #381833
    bazza500
    Participant

    Re: Servis M9503W washer-dryer dead

    This machine had a common fault with resistor R1 on the board going open cct causing the machine to appear dead.

    in reply to: gorenje tumble dryer fault, poss fault code #381549
    bazza500
    Participant

    Re: gorenje tumble dryer fault, poss fault code

    chesterfielddomesticappliances wrote: information would be very helpful.


    Model no?
    ART no?

    in reply to: Beko (leisure) side by side #381386
    bazza500
    Participant

    Re: Beko (leisure) side by side

    Well I didn’t have it with me and I didn’t think there was many of them…… :boops: However it’s an HJA6100.

    in reply to: Bosch WVD24520GB/01 #380082
    bazza500
    Participant

    Re: Bosch WVD24520GB/01

    :popcorn:

    in reply to: FSB worth joining? #379974
    bazza500
    Participant

    Re: FSB worth joining?

    You just get bombarded with insurance sales leaflets.

    Can’t think of any benefits…..

    in reply to: LG WD12336AD Drum Paddle #379435
    bazza500
    Participant

    Re: LG WD12336AD Drum Paddle

    Just put the paddle hard against the front of the drum then mark the part of the tabs that don’t line up with the large part of the slots and cut that part off.

    in reply to: LG WD12336AD Drum Paddle #379433
    bazza500
    Participant

    Re: LG WD12336AD Drum Paddle

    The first time I came across this was an under warranty call and this was the answer from LG technical.

    in reply to: LG WD12336AD Drum Paddle #379431
    bazza500
    Participant

    Re: LG WD12336AD Drum Paddle

    Taking the drum out makes no difference on this. The paddles are fitted before the drum is formed. The only way to fit a new paddle is to cut half of each tab off otherwise there is not enough room at the front of the drum to slide it in.

    in reply to: Sept Meeting #377148
    bazza500
    Participant

    Re: Sept Meeting

    Seems fine to me…..

    in reply to: Hotpoint EW81 – Tripping RCD When Hot #378874
    bazza500
    Participant

    Re: Hotpoint EW81 – Tripping RCD When Hot

    It will be the element.

    in reply to: Hoover VHW854D Washer/Dryer TOC #378650
    bazza500
    Participant

    Re: Hoover VHW854D Washer/Dryer TOC

    There is a modification by Hoover on this appliance where the safety stats were replaced with one at 180oC instead of 160oC to avoid nuisance tripping.

    bazza500
    Participant

    Re: Bosch Classixx – Needs 5 Minutes Main Power Reset EveryT

    I would suggest a sticking or worn motor brush.

Viewing 15 posts - 331 through 345 (of 1,916 total)