[bendaireboy]

Re: desperate bosch

ta A1 very much will check it out 😆 may live after all

[bendaireboy]

Re: Zanussi ZCE7700X fan oven cutting out.

nice tampon quote,definate fault its got 4 lead coming offof it and controls fan hence 200 degrees or more out it goes and restarts when cool,take it easy

[bendaireboy]

Re: Much work in South West area?

Martin it’s EMMETS in Cornwall and Grockels in Devon !!!!!!!!

[bendaireboy]

Re: miele dryers

seamy and ms thanks,it turned out to be float switch with twitchy internal contacts,much like me now, thanks again nige 😉

[bendaireboy]

Re: miele dryers

seamy mate, it was tested with a full wet load.also the red condensor light comes on sorry meant to mention that regards nige

[bendaireboy]

Re: miele dryers

condensing pump siezed solid, cleaned sump and hoses, i replaced part with new and tested to find m/c on normal or normal+ setting runs for approx 5 -8 mins buzzes with top and bottom lights flashing,i think it may be the float switch sticking in on position but pig to replace{metered contacts from pcb through loom and these are shut seemed ok when i fitted pump,}any ideas would help just wanted manual to confirm i’m not going mad nige

[bendaireboy]

Re: Wednesdays Neff challenge…..

it looks a bit compact to me don!!! 😆

[bendaireboy]

Re: Whats the most annoying thing customers do?

breath!! 😆

[bendaireboy]

Re: neff fridge freezer

thanks r600a for confirmation customer would not believe me,so having second opinion is cool, 😆 engineer

[bendaireboy]

Re: belling cookcenter

apparently the beko made one’s have link but not belling this is definatley belling made .have checked for thermal links and checked terminal block, block ok ,but belling say its the switch pack,which the stat fit’s into but thers isn’t one on this model just stat fitted directly to facia,the wiring diag shows switch pack aswell,is there another 132 wiring diag that someone may have or will I have to go back to first principles

[bendaireboy]

Re: belling cookcenter

ta guy’s I will let you know how I get on mucho apprreciated

[bendaireboy]

Re: neff oven b1420bogb5

just an update,you have to remove front and side panel ‘cos they put an earthing screw between base and front. pretty straight forward but watch fingers as panel’s like razor, ta eastlemark for trying be good 😈

[bendaireboy]

Re: miele premier 500 w828

update Seamy mate it was stuck in demo mode local miele guy had to do it for me, 😳 it’s my own m/c

[bendaireboy]

Re: miele premier 500 w828

tried but they didnt want to help back to the drawing board

[bendaireboy]

Re: miele premier 500 w828

thanks seamy i will give them a try,my laptop’s gone west too,I now use it as a discus 😀

[Author]

Posts