Forum Replies Created
-
AuthorPosts
-
BobHope
ParticipantRe: Hotpoitn WDL540p
thats an F01 fault, motor, module or the wiring, just be carefull as that model can be evo2 or arcadia module platforms.
Bob.
BobHope
ParticipantRe: 2000 watt or 2500 ?
also watch out if its a build in double oven designed to run on a 13amp spur or plug as these are rated at 12.5amps total power when both ovens are in use that extra 500watts puts it over the limit and takes the 13amp fuse out, free standing and single ovens will be fine.
Bob.
BobHope
ParticipantRe: Hoover OPH714D washing machine.Error
wash heater.
Bob.
BobHope
ParticipantRe: Bosch dishwasher SGS43A12GB/27
has the engineer done the wiring mod to the correct wires there should be only 1 wire cut and joined to an existing wire.
Bob.
BobHope
ParticipantRe: Teba 505600SS oven
try TEB10110406 on the connect site.
Bob.
BobHope
ParticipantRe: Bosch dishwasher SGS43A12GB/27
i have a list of which module kit fits which models, if any one wants it just PM me a valid email address.
the Sycasism is the way the module sees the wash motor,the Sycasism can be switched on or off via the module configeration, the wiring mod is for the salt empty indicator
if the mod is not done the salt indication is disabled.Bob.
BobHope
ParticipantRe: Neff S51T69XIGB/01 Dishwasher FD8803
when i come across noisy wash pump and i think something may be in it,the first thing i do is remove the spray arms and start a programme, the fast flow rate sometimes flushes it clear.
Bob.
BobHope
ParticipantRe: hoover optima oph614-80
count how many flashes before the 5 second pause then it repeats.
Bob.
BobHope
ParticipantRe: BEKO CDA539FW defrost
The CDA539FW product code 7215846314 has the defrost timer located in the compressor area, the CDA539FW/1 product code 7225446314 its at the top back under a plastic cover.
Bob.
that model is subject to the beko recall depending on its S/Number.
BobHope
ParticipantRe: Hoover vhd 814
8 flashes is a motor related fault, check motor and wiring.
correct model and product code will help further.Bob.
BobHope
ParticipantRe: Beko defrost heater
it looks as if the whole assembly comes as one part John. that part no. is correct.
Bob.
BobHope
ParticipantRe: The new Hotpoint MUD
exploded and parts diagram is availabe but no technical or servicing info, except for the special tool to remove the counterbalance weights.
Bob.
and it looks like its on the arcadia 2 platform module.
BobHope
ParticipantRe: DIPLOMAT ADP8322
without the product code i dont know if it has one?. if it has its behind the L/hand side panel and its a small reed switch.
Bob.
BobHope
ParticipantRe: DIPLOMAT ADP8322
product code would help, but if its stopping that early i would go for the water inlet turbine having loose or corroded connections.
Bob.
BobHope
ParticipantRe: hotpoint commercial w/m bs1400
email sent.
Bob.
-
AuthorPosts
