Forum Replies Created
-
Posts
-
Re: Engineer – What’s An Engineer
Was that definitely him back last night under the name Ken_W ❓
He doesn`t seem to have latched on to the IP address giving him away 😕 , maybe don`t teach common sense at university :).
Bryan
Re: HIGH TEMP ADHESIVE
Don`t know if you use Connect Mike but I`ve recently ordered TLS9032 from them although I haven`t actually used it yet.
Normally use SERSIL 1 which always works fine but it`s rated at 230C and the new one is rated at 280C IIRC.Bryan
Re: Free Dyson 5yr Guarantee!
That`ll keep the local Dyson engineer busy , suppose people won`t be too bothered about waiting a few days or perhaps even a week or two 😯 for a vacuum repair.
Bryan
Re: hoover ca230
Martin wrote:I would suggest fitting that part and simply plugging the spout? 😉
Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure this is the same one but I did a Hoover door seal a few weeks back and having removed the old one to discover there was no spout on it I was relieved to find although the new one had a spout it was actually sealed on the inner side. ie it`s a dummy spout.
Bryan
Re: Motor Brushes – Zan FLE1216
Might be totally wrong Mick , but have a look at Connect CBN9041.
Bryan
Re: Tax Day!
Yeah , just put mine in the post box about an hour ago :cry:.
Never a good time TBH Goose , even worse when it was 31st Dec. only a few years back. Put me right off my New Year drinking………not 🙂Bryan
Re: Call Yourself An Engineer
Hope you`re not speaking about me 🙂 , I think he`ll be back for more Greg , it`s good don`t lock it .
Bryan
Re: Ariston A1636
Don`t know if this is of any use , but I had a similar fault on this model and rather embarrassingly it turned out to be a small sock in the sump hose filter causing slow drainage. Worth a close look because it fooled me for quite some time , you`d think it shouldn`t be able to get up enough speed with water still in it but this one did although the water came out the soap drawer.
Bryan
Re: BEST WASHING MACHINE
Stretch the budget and go for long term value for money , Siemens WXL147AGB complete with 5 year parts and labour guarantee.
Bryan
Re: 51-BS-08 Bosch Pump
Now this is getting confusing.
51-BS-08 from SEME has a filter housing that you could fit (with screws :lol:) almost any standard Askoll or Plaset pump , I just picked pmp8808 because I think I`ve seen genuine Bosch pump assemblies use a standard Hanning.
Is the “Artiko” pump you mention a bayonet fitting ❓
Bryan
Re: 51-BS-08 Bosch Pump
Can`t find Artiko on them Dave but I`m sure we`re speaking about the same pump.
As Bob suggested I`m going to fix something more reliable to the filter housing , am I right in thinking I`ve ordered some gen. Bosch pumps and received a standard Hanning ❓ . PMP8808 fits a treat 😀 they`re pretty reliable aren`t they :?:.
Bryan
Re: 51-BS-08 Bosch Pump
bobokines wrote: I replaced the motors with pmp999s and threw the motors in the bin
Smart move Bob , did you just have a gut feeling that the original pump wouldn`t be up to the job ❓
Washman , looks like the Italians are better than the Brazilians at making pumps and playing football :lol:.
Bryan
Re: 51-BS-08 Bosch Pump
Can`t find any manufacturer on them 😕 , I`ve been getting them from Seme.
“Q.C. Passed” label on them 🙄 ………..aye that`ll be right.
Bryan
Re: Indesit FM20KC Element
This oven doesn`t have a fan element but just uses top and bottom elements and a fan motor to circulate heat.
Before ordering any expensive element I`d check the bottom element as I`ve had a couple on this model where the terminals have shorted against the rear cover. There is hardly any clearance between the cover and the uninsulated terminals to the lower element 😯 .
From memory I simply bent the terminals a little and fitted insulated covers to the connectors 😉
Bryan
