Bryan

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 732 total)
  • Author
    Posts
  • in reply to: I’ve found it!!!!!!!!! #245765
    Bryan
    Participant

    Re: I’ve found it!!!!!!!!!

    It’s a lock washer, very reasonably priced at £5:28+vat, I wonder how many of those they sell in a year 😕 probably about the same amount as the £86 Samsung door seal.

    in reply to: Samsung w/machine J1253 #244938
    Bryan
    Participant

    Re: Samsung w/machine J1253

    Ok 😕 , scrap yard it is then 😥

    I don’t think I’ll even put myself through this……”hello sir, just returning your call from yesterday” errrrrr “the price to replace the belt and door seal on your machine is £140”. Then you have to start justifying yourself 😡

    Bryan

    in reply to: Zanussi grill loose. #244734
    Bryan
    Participant

    Re: Zanussi grill loose.

    Again, from memory the original one is rivitted in place and I don’t think it even needed drilled out. The new thinner threaded shaft slotted into place and fixed with a nut.
    The job was a doddle anyway and although those double built under ovens look difficult to remove from their housing, they’re no problem really.

    Bryan

    in reply to: Zanussi grill loose. #244730
    Bryan
    Participant

    Re: Zanussi grill loose.

    Hi Jim

    Part No. 3113609006 is a replacement grill pin, from memory you need to remove the top and fix it with a nut.

    HTH

    Bryan

    in reply to: BSH Changes #242988
    Bryan
    Participant

    Re: BSH Changes

    Thanks Chris, well sussed out 😀
    I’ve always felt quickfinder was too good to be true and one day it would all be taken away from us, but good news for the time being and hopefully for the future.

    Bryan

    in reply to: Beko WMA1613S #242860
    Bryan
    Participant

    Re: Beko WMA1613S

    Speed control module 2812680031 😀

    in reply to: Di Dietrich D/Oven DMC402 #242608
    Bryan
    Participant

    Re: Di Dietrich D/Oven DMC402

    That’s perfect Ken, thanks very much :tup:

    Bryan

    in reply to: Beko JMB1522 #240978
    Bryan
    Participant

    Re: Beko JMB1522

    My next guess would be BE450920041 but that looks like black writing on the Connect website :?.

    Damned confusing, most of the Beko customers I get can hardly see the writing for grease anyway :lol:.

    Bryan

    in reply to: Beko JMB1522 #240976
    Bryan
    Participant

    Re: Beko JMB1522

    BE450920036 in stock at SEME.

    Bryan

    in reply to: beko pump #240836
    Bryan
    Participant

    Re: beko pump

    2801102400.

    in reply to: w/pool awg 329 #238451
    Bryan
    Participant

    Re: w/pool awg 329

    You could have a look at 817690111, I think it’s the same switch at a slightly cheaper price.

    HTH

    Bryan

    in reply to: SMEG WDI12C, DOOR LOCK. #238444
    Bryan
    Participant

    Re: SMEG WDI12C, DOOR LOCK.

    Part no. 817690111 🙂

    in reply to: British Gas To Drop Appliance Servicing? #162409
    Bryan
    Participant

    Re: British Gas To Drop Appliance Servicing?

    That’s pretty much central Scotland, just in case anyone intends visiting and looking in the wrong area of the map :wink:.

    in reply to: Electrolux EOB5630X oven #237600
    Bryan
    Participant

    Re: Electrolux EOB5630X oven

    I’d say it’s more likely to be the cooling fan control device thingy :).
    Part no. 8996619267611, very common fault and easily replaced.
    Situated behind the control panel, remove a couple of screws from the top and all will become obvious.
    Did one this morning on that very same model.

    HTH

    Bryan

    in reply to: White Knight WK767 #237421
    Bryan
    Participant

    Re: White Knight WK767

    At a guess, I’d say it’s probably a CL767?

    HTH

    Bryan

Viewing 15 posts - 46 through 60 (of 732 total)