[bubs]

Re: White Knight 42ASNC TD front drum seal

Thanks Steve, I have one coming with the next order as it was cheap enough if wrong, a bit confused as to why its down as an electrolux part.

Graeme

[bubs]

Re: Bosch WFL Codes

Thanks Greg,
OK This matches fault 2 in the book: Now know i can use for this model.
Graeme

[bubs]

Re: Bosch WFL Codes

WFL2860, its the middle “active” light that flashes.
Customer can press start and the prog will carry on.

I wondered if there is a mistake in the “spin, rinse, wash” light order in the fault code guide.

Thanks again,
Graeme

[bubs]

Re: Bosch WFL Codes

sorry this was aimed at the sticky fault codes thread
Graeme

[bubs]

Re: hpt f/f Model HM312NI

Had a job for a shop i work for, the customer had ordered a door seal (indesit), got there to see a stuck on door seal. No idea if indesit have a way of fixing it or they are sending out seals by mistake. Am interested as this reminded me, thought you had to change the whole door???
Graeme

[bubs]

Re: Caple C307 M/SS oven cooling fan motor

I Can see i need an account. Everything is currently ordered for me by a shop, either Connect or Qualtex. Southend here we come… 🙂

[bubs]

Re: Caple C307 M/SS oven cooling fan motor

Thanks Chaps 🙂

As you are on good form;
Just started doing Beko stuff, is there a fan element that fits a DV5522 oven that doesn’t cost £25+
Thanks again
Graeme

[bubs]

Re: Bosch WFL2260 no spin.

I never clean them up, fit gen brushes, had very few problems.
Was put off cleaning after being called out to many “engineer” customers cleaning the old Hotpoint GEC motors. They always ran much worse. Just my opinion, anyone else had similar?

Cheers
Graeme

[bubs]

Re: Kenwood CKB300 parts

Thanks Bazza 🙂

[bubs]

Re: hoover dishwasher hnd325/1 (mega load??)

Thanks Chris, very interesting info.
Regards Graeme

[bubs]

Re: hoover dishwasher hnd325/1 (mega load??)

Cheers, will order one. Just wanted to check the stats fail on there own.
Graeme

[bubs]

Re: hoover dishwasher hnd325/1 (mega load??)

Thanks for the quick reply simon.
Yes it’s in series with the heater. It is an odd shape, I don’t do H. Its bolted to the back middle, the heater is at the back, hidden. This DW does a 75c wash which she uses all the time.
Cheers Graeme

[bubs]

Re: Creda 37764 Condenser Dryer. No Heat

If Front stat ok, change the timer.
Graeme

[bubs]

Re: Tips or tricks replacing door seal on Ariston A1535

Agree, done last 3:
Seal on without fairy, cable tie band loose, fairy the outside of the seal and slip band on, pull cable tie, press with bent long nose pliers.
I know many are fitting springs instead but there is a very small lip on this tub, it could be pulled off.
Had a puppy completely remove a bosch door seal last week. Good dog!

Graeme

[bubs]

Re: AEG(Zanussi style) Washer Dryer – Model L16810

Hi, have you checked the condenser is not blocked?
Graeme

[Author]

Posts