[bubs]

Re: bosch SGS 4304 dishwasher keeps fillng and emptying

If its got a tin bottom it’s prob got a water input flow wheel ( impellor jug in bosch speak) , gives the same fault. just behind the fill valve and quit cheap.
Graeme

[bubs]

Re: Whirlpool D/W ADG7340 not washing

Nearly fitted a new wpl dishwasher motor that was a little stiff to turn a few weeks ago. Prob had a knock as it was ok after re-assemble. Don’t know if it would have ran slow.
Graeme

[bubs]

Re: Miele G7859 dishwasher F A fault

Cheers Seamy,
Yes it’s def F A in the display, have pic if i could get them off my phone!
I looked at this DW for a shop I do some work for, it has always been slow to fill so f08 would make more sense. However the segment that would turn a A into an 8 is working. They will have to call miele out if we can’t sort it.
Thanks again,
Graeme

[bubs]

Re: Hotpoint TDC32

Its normally a timer fault
Graeme

[bubs]

Re: Miele G7859 dishwasher F A fault

Hi,
Any other ideas on this FA fault?
Have a feeling i may have to have another look next week.

I don’t think its a drain fault, maybe fill or heat related?
Along with FA in the window 3 lights are on, final rinse, fill/drain warning, and additional drying.

Thanks again
Graeme

[bubs]

Re: Beko dishwasher not heating

Did one today,
The same 12v coil, 5 pin relay used on electrolux and some merloni.
The pcb is very cheap if you don’t have the relay -about £20- nice to see Beko pricing things so we can get the repairs.
Graeme

[bubs]

Re: Whirlpool AKZ146/IX (858514615020) oven not starting

Hi Rob,
I’m not sure now, only fixed a few of these.
This customer pushed the center button to start the oven, will it auto-start anyway after a few sec’s once the temp is set?
I have downloaded the instructions, it does not say anything about this button apart from how to set the time.
Regards,
Graeme

[bubs]

Re: Whirlpool AKZ146/IX (858514615020) oven not starting

Thanks Chris, will give the cheap option a try.
Graeme

[bubs]

Re: Miele G7859 dishwasher F A fault

Thanks,
When the fault code came up it was washing and heating. After this i canceled the prog and it drained ok. May have to pick this one up to test..
Graeme

[bubs]

Re: Bosch microwave F8 fault

Thanks Greg, even got my F and E mixed!
Graeme

[bubs]

Re: Bosch micowave F8 fault

Where is the spell-check on the subject line?? 😳

Model No is HBC84K550B/01

Cheers
Graeme

[bubs]

Re: Bosch WFE2021 prog fault

The customer has purchased a new machine. Thanks for your help.
Unknown to me it had gone wrong 4 times in the last 2 years, twice for motor brushes. So pos a motor fault, i had it washing but not spinning.

Graeme

[bubs]

Re: Indesit To Close Hotpoint Factory In Bodelwydden?

I saw a “made in China” label on a Hotpoint slimline dishwasher this week.
Graeme

[bubs]

Re: White Knight 42ASNC TD front drum seal

Thanks again Steve, arrived and it is correct, free bearings in the bag also 🙂
Graeme

[bubs]

Re: Bosch WFE2021 prog fault

Thanks everyone, having a look Sat.
Will post any updates.
Graeme

[Author]

Posts