Forum Replies Created
-
Posts
-
Re: hotpoint dishwasher sdw60p
cheers jonnyj
there was water in the pressure hose, and the limescale in the water had hardened in the pressure switch entry, (couldnt make it click by blowing hard) once it was cleared all was fine.Re: ADL348
cant see anything about more than one speed, only reference is
Spray pump motor . . . . . . . . . . . . . . .. . . . . . .2800 RPM
sorry cant be more help.
Re: ADL348
as far i am aware its a single speed motor, the old askol type motors certainly play up but if you have changed it for the new type with capacitor, it should be fine. is there 240v. get me a service number and i will have a bit more of a look.
Re: ADL348
read a service bulletin once that said sometimes the bent sump hose twists or collapses in operation reducing presure. never seen it myself but maybe worth a look.
Re: LG WM-14225FD drum jerks after 10 min
i would say hall sensor, possible part number 6501kw2001a
in stock on connections. 5031680950151Re: quiet week
keep fit, save on the electric and do the washing, the fitter you get the better the spin speed
could sell a few of themRe: Zanussi FJS1225w PNC 914512801(00), err flashing and con
as far as i can see there are only 5 lights above the fabric button, not 6.
this is the error code.
L5 Heating (and, in Jetsystem models, circulation pump)circ pump appears to be on most of the time with water level detected.
Re: aeg dishwasher keeps washing
there is a seperate relay for the heater that looks ok, i think the board switches through triacs.
Re: Whirlpool oven AKZ161/03/IX
looks as if if you you should of had some information with the pcb telling you to cut out certain service resistors on the new board.
Re: Whirlpool oven AKZ161/03/IX
may be able to help but a servise number would be best as there 5 or 6 under that model
Re: belling oven xou117 is my customer deluded?
if the fan is not running correctly the heat will rise from the element, and the capillary above will get too hot too soon and will switch the themostat off. this will give you low temperature.
Re: Whirlpool AWM5104/4 taking too long to do the program?
just found the times for AWM5104/4, about the same as above
