[bzz67]

Re: Siemens XB 1060 washing machine

seen broken wires to heater before on these, or maybe thermistor!

[bzz67]

Re: AEG B1180-1

sounds like a cooling fan not coming on then TOC cuts the power.
some of these ovens use this part number 8996619267611, these are getting quite popular’ usually look burnt when there faulty

[bzz67]

Re: Yell.com

the good thing is they can tell you how many hits you have had, ours have gone up about 400 per year. now at about 1200 a year, i am sure that some of those people pick up the phone and call. there search engine is working much better now than it did in my first year with them. they charge extra for silly things like a link to your website. overall i think a lot of people are using yell rather than searching through all those sections in the yellow pages. i for one put the yellow pages straight in the recycle bin at home

[bzz67]

Re: w/pool d/w adp4403

sticky pressure switch most likely but i have had some odd faults on these.

[bzz67]

Re: W/pool D/w ADP5740WH Flow Meter Fault?

small reed switch type on left hand side if memory serves me right,
the last one i had with that fault, a mouse had chewed through both wires to it. strange but there was no signs of mouse damage anywhere else on the machine. i thought for a while that someone had cut them!

[bzz67]

Re: Bosch Dishwasher

of coarse you probibly only need the instructions if anyone has a copy

[bzz67]

Re: Bosch Dishwasher

sounds like the pcb configuration has been changed.
when fitting a new pcb it comes with instructions on how to change it to the model required.

[bzz67]

Re: belling oven bulbs

is customer slamming doors, possibly due to poor catches !.poor quality bulbs maybe.

[bzz67]

Re: samsung 8E fault

thanks, i will let the customer know the price.

[bzz67]

Re: Hotpoint WM22 – pecker arm

MickGeorge wrote:Got the arm.. thanks bzz66… One happy customer…

Mick

No problem Mick.
cheers

[bzz67]

Re: insinkerator trouble

anyone know where to get spares for these machines? (other than direct)
i think on furher inspection (totally dismantled now) the bearings are binding sometimes. phoned direct today spoke to someone who’s response to any question was “we can send an engineer” or “using the allen key, turn it anti-clockwise then clockwise”

[bzz67]

Re: insinkerator trouble

no capacitor just a start windings switch in base which seems to be ok

[bzz67]

Re: Hotpoint WM22 – pecker arm

yes i have got one, but i would not tie up the old one for now, its a bit dangerous.
give me a call on 01884 254760 and will put it in the post asap

£14.00 inc p&p

[bzz67]

Re: AEG w/m configuration code

thanks again, came in early this morning worked just fine.
UKW saves the day again.

[bzz67]

Re: siemens w/m lights on but no go

thanks, i’ll give it a go.
ps: of course i knew not to blow into it 😉 😳

[Author]

Posts