[chezza]

Re: sgs45c02gb/02 bosch d/w

leavemetogetonwithit wrote:I think I remember the puffin, I mean penguin, saying you could replace the bearing easily enough on many of these motors.
Mike.

no, wasnt me 😆 must have been mr p 😆

[chezza]

Re: Appliance Technician requires work South of Edinburgh

funkyboogy wrote:depends how far south …

if your talking borders /peebles i know of 2-3 agents in that area and find it tough..

lots of running around .

ally

yes !! 😆

[chezza]

Re: Whirlpool D/W Rinse aid button

you have mail .
hope it helps
eddie

[chezza]

Re: whirlpool american f/f s20b rss31-a/g display flashing

mikethemechanic wrote:sorry youve lost me ??
the fridge and freezer are working perfectly and water dispencer works just the display flashing and ice maker not working?
did you understand that?
cheers i just didnt understand how the evaporator being choked would make the display flash and stop the ice maker working, if you try to dispence ice the bulb for the dispencer also flashes
cheers mike

You asked for advice, which i offered from my experience to check before paying a lot out for parts not neccesarily needed .
i wont bother next time

[chezza]

Re: whirlpool american f/f s20b rss31-a/g display flashing

i would check the evap motor is working correcty, and evaporator isnt blocked with ice ( ie not defrosting properly ) before changing boards…
by the date code of the serial number, you would need to replace front and back board if this does turn out to be the issue , due to compatability issues , but def worth checking the other first

edit .. also worth checking the condensor isnt choked and the condensor fan is working

[chezza]

Re: W/pool AWG349/4 Washer Dryer 8537 3041 5400

is the fan motor ok ? sometimes they can run slow and cause the housing to overheat

[chezza]

Re: petrol

my average fill is 110 litres a week 😯 been self employed for just on a year now , and i was paying around .99p litre back then . paid £1.22 yesterday .

[chezza]

Re: Whirlpool ADP5966

😮
hope it helps john

[chezza]

Re: They dont build em like that anymore – Part 20

iadom wrote: customers who had previously had a 1600

😯 :eeek: many many sleepless nights as a fresh young engineer ❗

[chezza]

Re: Maytag Neptune (LCD Menu)

there is usually a guide inside the top control panel , assuming previous engineers haven’t robbed it 😆
explains test procedures etc .
power supply off before removing the panels though – and mind your fingers on the sharp edges 😯

[chezza]

Re: They dont build em like that anymore – Part 20

or maybe the cold fill version , 1823 ?

[chezza]

Re: microwave buzing/humming confirm suspicions

check diode and capacitor too 😆

transformers not usualy too much trouble

[chezza]

Re: re whirlpool american top loader 3RLSQ8000JQ

leavemetogetonwithit wrote:There are thermal fuses in these machines, two in the one I’m working on currently. The plethora of posts mentioning the 6.3A slow blow prompted me to get a pack of 10 and take them with me but there was no such fuse in this 3RLSQ8000.
Incidentally, installing a 10A in place of a blown 6.3A? 8O. Sounds rather an unsafe practice to me.
Mike.

Thermal fuses are in the dryers , mike, but the op was asking about a top loader washer ( i know, almost identical mode number 😆 )

[chezza]

Re: Zanussi integrated microwave

I made the silly mistake of not noting the component details ( they were going to scrap it initially so didn’t see the point ) and the house is 50 odd miles away …. but I guess it is worth a revisit if I can source at a more reasonable price .
Thanks again Chris 😀

Eddie

[chezza]

Re: Zanussi integrated microwave

Very much obliged Mr P. Would I be pushing my luck to ask where to get these from ? There could be a tin of pilchards ( in tomato sauce ) in it for you 😆

[Author]

Posts