[clockworkone]

Re: wf101 tripping

i dont suppose anyone has a wiring diagram for these for future ref.would just like to see whats shared neutral wise etc.

[clockworkone]

Re: wf101 tripping

fitted new lock this am.no difference at all.reset m/c by disconnecting motor first closed door pressed start the word door comes up then trips out.have disconnected heater and no difference.readings on heater v/good.lady is going to use h/pt 5 year parts warranty as if it is motor(i doubt it)or module it will be more cost effective.thanks for all input.paul

[clockworkone]

Re: wf101 tripping

thanks for replies,once m/c reset it will not start any program and :door: flashes on display then it trips out.will only come on again if motor is disconnected.

[clockworkone]

Re: wf101 tripping

thanks mike.now i have to apologise for maybe wasting your time a bit. i have posted wrong machine model.i have posted m/c belonging to ladys mother that i did same day(same surname)correct model no is wmf540(brain def not engaged yest :clown: :clown: :clown:.any how this morning i went back to machine.disconnected motor and m/c came on.m/c was mid program so reset it to a rinse.then reconnected motor pressed start and it started flashing :door; in display.am i right in thinking that i may get away with interlock(one on order).as i said before m/c will trip mid program if motor plug connected.apologies again

[clockworkone]

Re: wf101 tripping

thanks for that mike.my real concern is that motor testing out ok and visibly looking good internally.was thinking that by disconnecting motor i may have opened up a short circuit elsewhere,tho nothing obvious.will try motor.thanks again

[clockworkone]

Re: wf101 tripping

megger readings all good >1000 bar the usual reading on carbons circuit.

[clockworkone]

Re: stoves dual fuel grill regulator replacement

anyone 😀

[clockworkone]

Re: indesit iwb 5113

thanks martin,removed motor,a lot of carbon sludge in it also removed and cleaned tacho put it back and it worked. they lucky with module as spray marks from belt evident on it.thanks again

[clockworkone]

Re: thor oven door glass

sorted 😀 ,located one this morning.

[clockworkone]

Re: Best form of advertising?

scientist,free weekly paper is a good place to get established and known.had adds in free and pay paper and free wins hands down.good deals can be had for long term placements.small labels stuck on m/c far better than bus cards.paul

[clockworkone]

Re: h/pt df61 heater

thanks for that info,its the latter and most expensive one.customer has decided to ber it.bosch heater very similar in price here to h/pt one.thanks again fellas

[clockworkone]

Re: stoves1200dfa range cooker

got model no-059056306 and ser no 00201863.would appreciate any available tech info on this one.also is there a pattern part available for grill element 081561404.unable to get genuine here at moment.paul

[clockworkone]

Re: stoves1200dfa range cooker

how easy are these to open up to get at control panel.paul

[clockworkone]

Re: stoves1200dfa range cooker

thanks for that seamy,going to have a look in morning.will post relevant no in morning.paul

[clockworkone]

Re: Zanussi ZDT6053 fault code ????????

heat fault is more often than not relay on these. easy to replace as well as no removing of plinth.rs stock no 2509652382 (js1a-5v)paul

[Author]

Posts