clyde

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 223 total)
  • Author
    Posts
  • in reply to: Do Dyson’s make you scratch your head??? #129205
    clyde
    Participant

    Re: Do Dyson’s make you scratch your head???

    anyone past level 14 yet? 😆

    in reply to: Indesit DI 62 Canceling programme part way through wash #128864
    clyde
    Participant

    Re: Indesit DI 62 Canceling programme part way through wash

    Anonymous wrote:sometimes the programme 4 light is flashing but mostly their are no lights at all


    Light 4 flashing is a filling up problem. but display going blank???
    as i said before you should get ant engineer to give you a full diagnosis/repair

    Clyde 8)

    in reply to: kwatt does a service call !!!!! #129149
    clyde
    Participant

    Re: kwatt does a service call !!!!!

    kwatt wrote: (struck me as a drug dealer type character actually)

    I’ve come accross these sort before – I was just started changing a door seal in a customers home when a knock at the customers door – Police raid!!! searched the place found some drugs and arrested two of the residents!

    At least the customer had insurance from the retailer (probly fiddled)

    Clyde 😆

    in reply to: Indesit DI 62 Canceling programme part way through wash #128862
    clyde
    Participant

    Re: Indesit DI 62 Canceling programme part way through wash

    Hi

    When your dishwasher is playing up do you get any “flashing lights”on the display???

    Also the display going off could indicate a control board fault – but i would advise to get an engineer out to fully diagnose the fault.

    Check out repairs@ for a local engineer.

    Clyde

    8)

    in reply to: Indesit D41 Error Code #128611
    clyde
    Participant

    Re: Indesit D41 Error Code

    The fault is A01 which means that there is water in the base of the appliance.
    So you may have a leak somewhere or your dishwasher has overfilled.

    Blocked filters can cause it to overfill as can overdosing with rinseaid (3in1 tablets and rinseaid)

    Have a look through the other indesit posts as this fault has been well covered before.

    If you have a look yourself – PULL THE PLUG OUT FIRST :zap:

    Clyde 8)

    in reply to: Martin’s New Car #128567
    clyde
    Participant

    Re: Martin’s New Car

    his lass doesn’t look too happy that theres no seat for her :rotl:

    in reply to: Ocean frost free fridge freezer, frost free not working #128566
    clyde
    Participant

    Re: Ocean frost free fridge freezer, frost free not working

    bill_dodsworth wrote:about two months ago started making alot of noise (fan vibration I think). Since then it has started producing alot of ice, w

    or can you recommend a service engineer in the Staines, Chertsey or Egham area.


    sounds like your your freezer isn’t defrosting properly. the noises will probly be ice catching the fan blade. local engineers can be found using directories or repairs@

    or you can try totally defrosting your freezer (switch off and unplug for 36 hours with the door open) but the fault may return!

    clyde 8)

    in reply to: My Indesit D61 does not turn off #128564
    clyde
    Participant

    Re: My Indesit D61 does not turn off

    Hi Mandy,

    do you get any lights flashing on the control panel?

    To be honest you’re probly best off getting an engineer to take a look, look in repairs@ for a local engineer.

    clyde

    8)

    in reply to: Creda T620CW Not Heating #128444
    clyde
    Participant

    Re: Creda T620CW Not Heating

    It could be the front thermostat thats failed. A few other possibilities are the heater itself, damaged wiring, or a possible timer fault.

    If you are unsure look in repairs@ for a local engineer. If you do have another look pull the plug out first :plug:

    Clyde 8)

    in reply to: Hotpoint Aquarius Condenser Dryer #128514
    clyde
    Participant

    Re: Hotpoint Aquarius Condenser Dryer

    Does the filter light come on when the dryer is running?

    If it’s only at the end when you open the door then it’s a reminder for
    you to check the filter.

    Clyde 8)

    in reply to: Bosch Fridge query #128495
    clyde
    Participant

    Re: Bosch Fridge query

    Possibly the compressor has failed. The clicking could be the thermal overload, If you touch the compressor it should be warm when running but possibly very hot when failed, so please be careful.

    If the compressor has failed it’s a very expensive repair.

    Clyde 8)

    in reply to: Creda T620CW Not Heating #128442
    clyde
    Participant

    Re: Creda T620CW Not Heating

    barney11 wrote:Hi

    I have checked both thermostats as described in earlier post on various creda’s and they seem fine(both convex).

    Hi Barney :beer: :beer: :beer:


    Have u checked the stats for continuity with a multimeter? (visual check is normally ok. multimeters are a bit more accurate)

    if the stats are ok is the water full light on when in use? and is the drum definatly turning???

    Clyde
    8)

    in reply to: Top Loading Dishwasher? #128390
    clyde
    Participant

    Re: Top Loading Dishwasher?

    The zanussi will do you champion then 😆

    as for the washer dryer i’ve got a bosch WVF2402 it’s served me well so far and you get a 2 year warranty.

    Clyde 8)

    in reply to: Top Loading Dishwasher? #128386
    clyde
    Participant

    Re: Top Loading Dishwasher?

    Here’s a couple of table top ones

    http://tinyurl.com/6oz5m

    I’ve got the zanussi one, it’s relaible and cleans well. but it is small!
    Bosch dishwashers in general are excellent.

    Would a washing machine fit in the fairly inaccesible corner? then you could put the dishwasher where your washer is

    Clyde

    8)

    in reply to: Zanussi wjd 1257 W #128262
    clyde
    Participant

    Re: Zanussi wjd 1257 W

    grooster wrote:
    Any idea what E20 is.

    E20 is drain problem and what it flashes up for the customer

    When you go into diagnostics E21 is drain problem on wash – E22 problem on dry. If its draining ok check for blocked condensor and blockage in pressure system.

    Clyde 8)

Viewing 15 posts - 91 through 105 (of 223 total)