Forum Replies Created
-
Posts
-
Re: WM63 timer
Interlock can definately take out the timer tracks on these, had that a few times. Have you traced the wires back to the component from the damaged track ends? That is usually a good indication of where ythe fault is 😉
Tony C
Re: Diplomat ADP8322 dishwasher FA fault code
I have the same, is the OWI 5031682990384 on connections?
Can’t find manuf. description anywhere.TonyC
Re: Local trade rivalry?
Could’ve written your initial post myself, Martin. 😕
Exactly the same in my area, been reccomending a local refrigeration only firm for years and never had a smile from them. Still, I’d rather reccomend than leave the customer with the dreaded YP.Tony C
Re: Noisy boiler, not the missus
Cheers for the replies Gents 🙂
For the first few days I genuinely thought it was a prop plane doing airobatics as we live near a few airfields 😳 . Weird noise!!!
Tony C
Re: Bosch grill element
The only code that quickfinder recognises is 07504 52229 which I thought was a phone number when she gave it to me 😳
EB634HG is shown in the header when the diagram comes up. Still can’t see the plug in elly though only the top n botom ones and the socket.
Tony CRe: Nardi LSi60h motor
Indesit motor fits and works fine. I ordered the 077118 motor which just needs the end cap at the rear retaining off the old one and rivetting back on.
I just need to cure the hole in the tub corner where the fitter shut the door on a screw 👿 and then reinstall it using something more suitable than 2 x 6″ long 3×2 blocks on every (well 3 ) foot. 😈Tony C
Re: WANTED HOTPOINT DOOR INTERLOCK
Got a couple in my secondhand but obsolete box.
PM me if you want one.
Tony CRe: Nardi LSi60h motor
Tried to contact Nardi on the numbers from their website but to no avail so far. Anyone know any other contact details for them.
Tony C
Re: Question for Indesit employed engineer?
It wor proper nasty 😥
The new blue Hotpoint uniform I had back then was black when i came out, I was completely drenched when I came out, as you walked downstairs to it the humidity crawled up yer legs. I had to walk about four blocks back to the van squelching as it was central London.Tony C
(PS Sorry for hijacking your post with me story Martin 🙁 )Re: Question for Indesit employed engineer?
Had one in the basement of a dry cleaners years ago when I worked for Hotpoo. Early WM range, rotten from the inside out within two years cos of the moisture down there, (also covered in cockroaches and hemmed in with bed mats, people slept down there I kid you not) which was I/G and on a D and G insurance. Both went for the repair no problem even though I’d reported it to both parties on two occasions. :con:
Doesn’t exactly answer your question but you’d think things would have changed…………………………….wouldn’t you?Tony C
Re: Siemens/ Bosch motor end cap
Does the Hotpoint one do the trick then. That’ll save ’em a good few bob…..next time 😥
Tony C
