Forum Replies Created
-
Posts
-
Re: smeg microwave door switch
No idea on the Lux part but gen No.760530801 and found this site – http://www.spares4appliances.co.uk/micr … pcb-p38657
Re: Zanussi ZWF1431W Washing machine E34 Error code
Pressure switch defective;
Electrical current leak between heating element and ground; Heating element; Wiring defective;
Main board defective.
Water circuitRe: Bosch WFL 2260
Thanks for your replies on this, I called this afternoon and again never faulted for me. the customer said she did a heavy load yesterday and repeatedly failed about every 20-30 minutes and I now suspect the motor to be at fault as the insulation started at about 45meg but after 10 minutes changed to 9meg and have left the customer running the machine on a smaller load but due to the age I doubt that she will want the motor replaced.
Re: inesit wd10 not heating
The round one with 2 spades is an NTC and the one in line to the element is a TOC/thermal fuse.
PM your email and can send you some info on this.Colin
Re: weird door issue
would agree with Franz but also check the supply, if hard wired to spur check the connections there first and if on plug check in different socket as burnt out connection can cause this type of fault.
Re: Zanussi FJ1296 facia clips
Haven’t done one for a long time and used to have the same problem until I spoke to a Zanussi engineer. First prize the push button off and then with a pair of pliers just break the old switch off from inside the machine – Fit new switch and replace button – Simple & no need to remove facia.
Re: Zanussi ZKG7125 914604042 00 washer dryer ventilator
Looks like DST1323244135 poss without motor but still over priced.
Colin
