Forum Replies Created
-
AuthorPosts
-
Dave_Conway
ParticipantRe: UKW Charity?
Nope, first I’ve heard of it to be honest 😕
Dave.
Dave_Conway
ParticipantRe: Hoover TV630 interlock relay board
Don’t forget to power off when checking/repairing please :zap: 😀
Dave.
Dave_Conway
ParticipantRe: Diplomat ADP 8342 – not draining
It’s quite likely the heater cut out has failed.
If you do a forum search for your model number (with and without a gap between the letters and numbers) there are numerous posts on this Chinese (Haier) manufactured appliance 🙂
Dave.
Dave_Conway
ParticipantRe: Anyone recognise the mftr from this model number ?
Connect show it at around £19 and Masterpart around £15.
Both have stock 😀
Dave.
Dave_Conway
ParticipantRe: Brandt Fridge Freezer fault
It’s certainly a frost free model 🙂
In that case, follow MKR’s advice and carry out a complete defrost, there is excesssive ice behind the freezer rear panel and the drain hole is blocked.
If it happens again then there is a defrost problem which will require an engineer to check, the repairs@ link below should provide one.
Dave.
Dave_Conway
ParticipantRe: Anyone recognise the mftr from this model number ?
Google shows it as a Diplomat but as you say it’s the wrong model format 😕
The 02-?????? number format is Caremark’s (Bernstein) but the closest I can find is a Brandt made model of 02-800223 with part number 76X3605 for the simmerstat ?
Dave.
Dave_Conway
ParticipantRe: Prima Washing Machine?
The 12nc should be 8539…. it’s a fridge as you say.
The LPR710 is a Zanussi in disguise, part number for the door seal is 1240167427 which doesn’t supersede 😆
Dave.
Dave_Conway
ParticipantRe: Known Error Codes
Late Smeg washing machines and washer dryers, also covers Smeg manufactured rebadged machines
E1 Water loss safety device
E2 Anti-spilling device (only outside washing program)
E4 NTC water in short circuit or interrupted
E5 No load
E6 No drain
E10 Motor overcurrent
E11 Motor control triac in short circuit or interrupted
E12 Tachometer
E13 PTC door block
E14 NTC dryer in short circuit or interrupted
E – Interface communication problem – mother board
E – Card hardware malfunctioningDave_Conway
ParticipantRe: New world built under oven CK13548
Just another thought, any leaky elements ?
That would cause it as well.
Dave.
Dave_Conway
ParticipantRe: whirlpool w/d latest sort error e14
It’s the dryer NTC at fault for E14 and they do very odd things when they fail, I’ve fitted a couple.
The Smeg part number is 817890012 it may be cheaper than the Whirlpool recoded part 😉
Dave.
Dave_Conway
ParticipantRe: SCANDINOVA SPARES
It depends on the model, Scandinova is a Comet brand name and made by several manufacturers 🙂
Dave.
Dave_Conway
ParticipantRe: A Rumbling, Graunching Sound
Unfortunately not, no appliance spare part does to be honest.
Dave.
Dave_Conway
ParticipantRe: Diplomat ADP 8322 Dishwasher
Is the light just flashing constantly or is there a sequence to it ?
It sounds like the usual NTC error to me, if it’s just pulsing on and off, type “NTC and Whirlpool” (exactly that without the quotes) and you’ll find plenty of info on this fault 🙂
Dave.
Dave_Conway
ParticipantRe: G B DARS OF WIDDEN
I knew it would be here somewhere, I just found this old article 😀
https://www.ukwhitegoods.co.uk/modules. … le&sid=359
Phone 01942-601604 Fax 01942-265664
Dave.
Dave_Conway
ParticipantRe: G B DARS OF WIDDEN
LittleMan wrote: Can any one tell me who thy are
Have a look in the rumour mill, there’s tons of information about GB DAR there 🙂
Dave.
-
AuthorPosts
