Dave_Conway

Forum Replies Created

Viewing 15 posts - 9,211 through 9,225 (of 12,426 total)
  • Author
    Posts
  • in reply to: Diplomat ADP8101/2 Integrated Dishwasher #125420
    Dave_Conway
    Participant

    Re: Diplomat ADP8101/2 Integrated Dishwasher

    The element overheat thermostat will have “tripped” and needs resetting.

    If you’re not confident tackling this, then you’ll need an engineer to do it for you Jools.

    If you are going to have a look, whip the plug out of the socket :zap:

    Dave.

    in reply to: Hygena APM2314 Integ. Hood #125485
    Dave_Conway
    Participant

    Re: Hygena APM2314 Integ. Hood

    I would check other things first in that case if the whole thing appears dead.

    I would imagine you have just moved in to a new home and this hood was already there when you say inherited ?

    I’ll wager that the previous owner has switched the isolation switch off for it, have a look on top of the cupboard the hood is installed to for a switch of some sort 😉

    If that’s how it is installed of course.

    Dave.

    in reply to: Ariston margherita 2000 AWD12… #125396
    Dave_Conway
    Participant

    Re: Ariston margherita 2000 AWD12…

    Temperature probe leads not connected by the sounds of it, or broken where they connect is more usual on these.

    Dave.

    in reply to: Sheep Dash #125478
    Dave_Conway
    Participant

    Re: Sheep Dash

    Just the one, and it’s after ewe for the biscuits 😀

    Dave.

    in reply to: Sheep Dash #125476
    Dave_Conway
    Participant

    Re: Sheep Dash

    ……..I’m off to make myself a coffee 😀

    in reply to: Hygena APM2314 Integ. Hood #125483
    Dave_Conway
    Participant

    Re: Hygena APM2314 Integ. Hood

    You can still get the spares for this model Clive.

    Is it the plastic slides that have broken or the switch itself ?

    Dave.

    in reply to: Hotpoint M’Wave mw13n wiring dia’ #125475
    Dave_Conway
    Participant

    Re: Hotpoint M’Wave mw13n wiring dia’

    If it’s any help, on Partfinder it tells me that this is made by Delonghi and Merloni will not be supplying any spares for it, although they list a few, mainly the customer replaceable parts.

    No manual listed either so I doubt there is one 😕

    May be worth a call to Delonghi though – http://www.delonghi.co.uk

    Dave.

    in reply to: Bosch SGS5302GB/09 #125186
    Dave_Conway
    Participant

    Re: Bosch SGS5302GB/09

    I think you’re putting the info in the model number search area by the sound of it.

    On the same page, you should see the shopping basket button, click on that and you can input part numbers directly (scroll to bottom).

    Hope that helps 😀

    Dave.

    in reply to: Bosch KGV-3104-G/04 Fridge Freezer #125152
    Dave_Conway
    Participant

    Re: Bosch KGV-3104-G/04 Fridge Freezer

    Is there a part number for it please Ray ?

    Dave.

    in reply to: Tabletop Dishwasher Recommendation? #124948
    Dave_Conway
    Participant

    Re: Tabletop Dishwasher Recommendation?

    Have a word with your local Service Force centre http://www.serviceforce.co.uk about the Zanusssi, as it’s only 3 months past the guarantee period, there may be something that can be done to help 😀

    There may not, but it’s worth asking 😉

    By far the better dishwasher in my opinion.

    Dave.

    in reply to: hoover AC110 #125474
    Dave_Conway
    Participant

    Re: hoover AC110

    Take the motor out again (with the plug removed from the socket :zap:) and check the coil on the end (tacho generator).

    Sounds like that’s the problem to me 😉

    Dave.

    in reply to: Smeg DWF 66SS #123721
    Dave_Conway
    Participant

    Re: Diplomat Dishwashing machine

    PPitcher wrote:What is wrong with my dishwasher?

    It’s not draining basically, which could be either a blockage or the drain pump has failed.

    Is it the same make and model as the actual thread topic ?

    Dave.

    in reply to: Bosch fridge freezer KGE3301GB/02 #125324
    Dave_Conway
    Participant

    Re: Bosch fridge freezer KGE3301GB/02

    There’s 096000 directly behind it as well at £112.80 plus VAT etc 😉

    Dave.

    in reply to: White Knight 767s Overflow problem? #125473
    Dave_Conway
    Participant

    Re: White Knight 767s Overflow problem?

    If it isn’t blocked then the pump that drains the water from the reservoir to the water tray will have failed.

    More likely is a blockage though which requires a major srip down 🙁

    If you’re going to have a go at it yourself, please pull the plug :zap:

    Otherwise, try repairs@ and the directories for an engineer that can help 😀

    Dave.

    in reply to: Baumatic BT904 built in double oven #123245
    Dave_Conway
    Participant

    Re: Baumatic BT904 built in double oven

    Sorry, I meant to post about this the other day, all I can find from the usual suspects are 10A one’s which aren’t suitable, especially on a double oven.

    I’m Googling furiously right now 😉

    Dave.

Viewing 15 posts - 9,211 through 9,225 (of 12,426 total)