Forum Replies Created
-
Posts
-
Re: Hotpoint WF321P washing machine
lights 1 and 3 are pressure switch not sensing so…..
you have something blocking the sump/pump of your machine check the filterRe: Hotpoint WF321P washing machine
from the top down number the lights 1 to 5 and let us know which ones they are
Re: WMA58 pressure chamber
if its the oval one on the little plastic bracket then i have one in my hand right now by the rivers of blackpool
Re: hotpoint wm64p door switch fault
stop banging it and replace the door interlock right away repeated banging will damage the lock in such a way as to damage the timer and that is a costly spare compared to the price of a door interlock
do nto even use it till this is doneRe: Indesit WIDXL126 Fill Levels
imo beko and indesit are currently the same level of tat
as for was fill levels are your clothes actually clean as the more modern machines do use less water as they do not come out any cleaner with more water as for the powder it is well known that main brands are generally better but i would not put my name to any particualr brand…someone on here will have a bettter answer for you there
as for drying stiff i cant see that being anything to do with the machine’s low water level but you are right they do do lower water for the efficiency and across the board this is soit is supply and demand people want a cheaper machine that costs less to run end result indesit appliances
i hear ise do a good machine 😀Re: Hoover Vision HD – VDH8162-80 – Noisy spin
why would bearings go on a 2 year old machine hmmmmmmmm
massively oversized drum and spin + large door leading people to think it means fill to top of drum= 1 knackered washer
these days people buy a machine for less than 500 and a top spec one at that then overload and run it at full pelt
it is the equilelant as going out and buying a brand new car (daewoo or kia…..) then putting 8 fat blokes in the back and filling the boot with beer then doing a booze cruise to france all at top speed and wondering why it does not last very longask too much spend too little
as for your post if the drum is sealed then the bearings are slightly more simple than a non sealed drum as all you gotta do is …..change the drum
😀Re: Hotpoint Aquarius WF740 won’t end cycle, it’s stays on
if the element is knackered the mahine is still waiting to heat up even 6 weeks later
if it is intermittent then are you sure the load is even as an uneven load will cause alll sorts of spin problems
Re: HP WF 000 washer
these are lights 1 and 2 so f12 comms error
either wiring loose or board is a gonerRe: hp wml540
no dop is right i have had several of these where the door does its clicky thing and it turns out ot be wiring to motor loose or broken
Re: Hotpoint WDM73A – Concrete block smashed!
i just had my crapman come around yesterday and he took dozens of blocks away from me as scrap
have a pop around to a local shop they may have a scrapper you could steal it off
or try and buy a breaker off ebay and there ya go
