Forum Replies Created
-
Posts
-
Re: Hotpoint WF250 leaking at bearing seal
the bearing comes in a kit with the seal and you change it all
some of these come with a seal drum which cannot have new bearings fitted although not sure about yours
you should be able to get the bearings from this site somewhereRe: Whats the most annoying thing customers do?
i was just reading this thread when my phone rang and i had to put it on here
lady informs me that her hotpoint wm31 is blowing the fuses
but only on the final spin
she then informs me that one of my engineers only fitted a motor 4 months ago
she then says that it has been blowing these fuses ever sinceso this lady expects me to believe that we fit a motor 4 months ago and charged her and that it has never completed a wash since and she is only just ringing me today
i offered to go out monday
she then queries can you not come out any sooner!!!!!!
i want an idiot button on my phone thats cuts these people off and forwards them on to a different firm let them deal with herRe: INDESIT R 24
left this on overnight and its still running
– 10 in fridge and – 38 in freezer
what are the chances of a faulty stat??
and would that cause the lamp to only work when it feels like itRe: hotpoint wma62
Just in case anyone has a similar fault i went out to a wma60 no spin no rotation at all i had a spare board still no good wasnt until i was just about to give in that i selected a spin cycle and the machine which was a 1400 showed spin speeds of up to 1600
all it needed was reconfiguring to the right setting
dont know how it happened maybe youngs ones playing with the buttonsRe: r600
doing a lot of fridges the small bottles are fine but just after a larger bottle for ease
i do not transport the gas around i bring the fridge to myworkshopRe: Hotpoint Indesit Tumble Dryers Scrape after fitting drum
i hate these dryers take out half a dozen screws and the entire appliance is like a flat pack from ikea
Re: Hotpoint Aquarius Extra – Door light flashing Help Wante
You got the model number for this?
htp aqua models when the door lock pops usually blow the timer or board depending on which model it isRe: servis mv6612w
so that should be on the seal itself
ok thanks andy i will pop out to see him again and steal away the seal
bit of a pain he is owner of a chinese restaurant and speaks little english so explaining he problems i am having with this part is difficult at best
thanks
dannyRe: Zanussi FJ1093 Ineffective Spin
IF the filter is clear then start the machine up on a rinse with no clothing in once it is full stop the machine and put it onto a drain or spin program the drum should be totally empty in less than a minute if it is not then your machine has a blockage somwhere restricting the water.
so when you spin a second time it has more time to drain away water and spin correctly.Re: R600a release
thanks for the info i have not done it myself i just asked him if he knew anyone who did r600 in larger containers as all i can find is the small bottles and he said use butane so i just nodded then came straight on here to see whats what
now i know
ta fellahRe: not sure about black spots (bosch washer)
very doubtful that its going to be bearings most likely mould few hot washes with soda crystals and regular maintenance washes should sort you out
Re: R600a release
so what is the difference between r600 and butane a fella i was talking to today says it is exactly the same just without the smell and that it can be used in place of r600
is this right?
