Forum Replies Created
-
Posts
-
Re: Zanussi t/d
I Have had this fault many times the first few times the machine chucked the belt off within a few weeks,
i noticed on one dryer the cabinet by the motor was bent so the motor was out of line straightened cabinet no more problems always check them now:)Re: hotpoint wm62 washer
i think your right iadom but i am sure there was a yellow one maybe it was on the wm 50 somethings.
Re: hotpoint wm62 washer
the plug does contain resistors of varying values.top of my head blue is variable yellow is 1100 and white is 900 without the plug the machine is a 1000 SPIN
(i stand to be corrected on the exact colours)Re: HOTPOINT AQUARIUS WASHING MACHINE WM62
Have you been having to slam the door recently this is usually a sign the door lock is faulty and repeated slams will cause damage to the timer.
Re: zanussi ZJ1217 configuration
I HAVE a zanussi fle 1254w and i also need the config date for this machine .
Re: Just for the record..ouch!!!
i was once changing a belt on an old htp 95 something, and the dear old lady plugged her vacumm cleaner into the extension lead and plugged it in, just so happens that the washer was on the same extension and bang my arm is on the mains lead :S 😡
Re: W/Knight CL767 Con Drier – No Heat
i just did ont last week the front stat i got to by removing the kickplate and front panel but it was ok on the machine i did the actual timer had burned causing pretty much the same fault you describe if i remember it was a black wire, or was it blue??
whatever you do dont cut the red wire …..boooom lolRe: Hotpoint Washer, WM21, door opening mid cycle & FAST
faults do occur on machines with age but this type of door lock mechanism is not widely used anymore and i am sure that it is easily repaired as the penguin says.
but in the meantime dont use it:)Re: WMA40, constant knocking noise
i have never seen one of these spiders break or the pulleys’s.
but i have seen many many loose pulleys which cause loud cracking noises when turned by hand this is where i would look for the noise source should just be your flat fee for doing the work i would charge 35 + for it:)Re: ufindus.com
I have the same problem, we too are with the tps but we still get weekly calls from ufindus we have neer signed a contract or even given them time to do a verbal one most calls start with them asking my staff to put me on the phone then telling me it is an urgent business matter or that someone wants 5 washers to buy or something when i ind out who it is i ask them, plead with them not to call again to put me on there do not call list..
and virtually every time all i get in response is fuck off or mardy bastard
or wanker or just abuse.
what kind of company rings YOU to disturdb YOU then insults YOU.
i reallly dont care how many people lose there jobs but this firm should be closed.Re: creda t622cw
Condensor unit is the plastic piece that connects to the metal rear and bucket is the container, and i have cleaned out the float already it is clear of any blockage and water is collecting in the conatiner but only a small amount
Re: Bollards…..
IS THIS for real and if so where are there accident magnets located? i have never seen anything so stupid. except maybe the div’s trying to get through.
Re: Tablets don’t go in
dont use the net bag the only thing it is good for is getting caught in a pump knocking off paddles or pulling out wma heaters:(
Re: The shelf above the washing machine…
because these people have the best intentions and every other week by the latest no nonsense cleaner ie cillit (barry scott) bang.
then get home and realise that to us it means turning off the telly and breaking into a sweatlazy buggars but they still expect me to crawl around in there filth.
