Forum Replies Created
-
Posts
-
Re: How many pints can you buy for £1500?
I charge a tenner to go out and inspect the machine, if the customer has the work done then the callout is scraped if i sell them one i knock it off the price of one.
the only time i charge just ten pounds is if i go out say fault is x and the customer says ok well i will do it myslef or similar.
the bonus is once they have paid ten pounds towards it they are more likely to stay with you and a tenner aint much to anyone so does not put many people off, except those timewasters.
to go out costs me
time
petrol
wear and tear on a van
having a van
insuring it
insuring myself
staff
having tools
and also not being in my workshop building a machine i could get 2oo quid for
charge them 🙂 you dont owe anyone a favour
our knowledge is a valuable thingRe: Hotpoint WMA64 how to get into diagnostic programme
hello jim any chance you can send me that as well ta m8y
dannyRe: Bosch washer won’t drain – i’ve tried everything! help!
water and lectricity is a dangerous mix, just ask us and we will tell you what shocks are like.
i have a regular customer who is terrified to go in the kitchen when the washer is running as his father opened the lid of a washer and touched the innards while still plugged in, he died washing machines are dangerous when live!!
Re: Bosch washer won’t drain – i’ve tried everything! help!
I am almost certain this will result in you replacing the pump.
Re: Bosch washer won’t drain – i’ve tried everything! help!
F04 IS A DRAIN OUT FAULT
is your machine
a. draining slowly causing the error to appear
b. not draining at all when the error appears
if it is then you may have a blockage in the sump hose or waste pipe
if it is b then it could still be a blockage or more likely the pump has had it, pumps are fairly cheap parts and generally easy to fit so well worth a try if you are not confident to do it yourself then there is a link on this site for an engineer to call to you.
also why buy a non bosch machine?
most pump faults are the result of a foreign object doing da,age and not the fault of the machine
let me know how you get on:)Re: Ariston A1635UK
if the door is locking and the machine wont take water has he kinked the water inlet pipes (red and blue) to your machine or not even turned them on??
check this and let me know:)Re: INDESIT WE10UK
than corn i will have to do that and give it a try,
especially since its hard to work without knuckles 😆
Re: Can u Help with A Blonberg 1315?? Please
you must have been typing at the same time as me oh well pressure problem it was lucky man:)
Re: Can u Help with A Blonberg 1315?? Please
before you opened the pump was it full of water, it may be a blockage in the pressure pipe or more likely a timer fault these machines are notorious for it, the more info we get the better advise we can give
power off if going inRe: Hoover ACM16
all faults along these lines tend to be board/timer related,but it is well worth checking all the wires connect tightly:)
Re: Beko wma1614w washing machine
Does the machine just get to spin and continuously tumble, if so it may be in need of a new belt i have had this problem before on servis and beko machine the belt stretches ever so slightly and the machine seems to believe the load is uneven its worth a shot:)
