Forum Replies Created
-
Posts
-
Re: Diplomat AAA1473 Induction Hob
Hiya,
Just to let you know that the information worked.Thanks
BrianRe: Diplomat AAA1473 Induction Hob
Hiya,
Thank you both.
I’ll let you know how it turns out.Thanks
BrianRe: Diplomat AAA1473 Induction Hob
Hiya,
No, no key symbol on this one.
The one with the key is a touch and hold till it goes off job.
Would have been nice.Thanks
BrianRe: Diplomat dishwasher 6 flashes.
Hiya,
Flowmeter, water indicator or no water coming in is the normal causes of this one. (Flowmeter normally changes from 6 to 7).HTH
BrianRe: Creda Cooker 48341
Hiya,
If the new regulator had a connection 4A then that is the neutral now. On the older ones it was 4.
If you can post the terminals from the old one and the new one I’ll work it out for you, unless you managed with the pdf.Brian
Re: FAULT CODES GUIDE ERROR
Hiyas,
Page 49, LG washing machines.
Error code LE actually indicates a LOCK Error on the motor. Hall sensor is faulty.
Brian
Lucky GoldstarRe: Re Candy CN126 T UK
Hiya,
Uploaded for you. http://rapidshare.com/files/221928309/3 … 2.pdf.html
Brian
Re: Hotpoint Fridge Model 6936 Thermostat
Hiya,
I would test it with a meter if I was doing the job, unfortunately I’m not and I doubt if my mate even has a multimeter. He’s one of the “dive in” brigade.Like I said, it’s the numbers on the stat I don’t get. 3, 4 and 6 would have been no problem.
Thanks
Brian.Re: Hotpoint WMA36S Wiring Diagram + WMA62P fault
Hi Bob,
Got them thanks.
You’re a lifesaver.Ta
Brian 😀Re: Whirlpool American S20D 8586 158 15000
Hiya,
Unplug the appliance, plug it back in and then open the freezer door and look at the right hand optic. Count the flashes.
From the time you switch on you have 1 minute in which to check the results of the power up diagnostics.Check your pm.
Brian 😀
Re: diplomat fault code
Hiya,
It’s a Whirlpool appliance.
F4 = Draining Failure.
If it’s draining, check the water indicator (black grid in the sump).HTH
Brian 😀
