Forum Replies Created
-
AuthorPosts
-
don
ModeratorRe: Halogen discontinued……Ceramic swap?
Hi
Belling cookers with halogen rings were for the better off customers due to their price point being higher and as such were not big sellers.
Twenty years ago when those models were made the life expectancy of such a cooker would have been between eight and ten years. So after eight years the manufacturer would have deemed the machine to be obsolete and would have let the spares run out naturally.
I have not had a customer in the shop in the last ten years with a request such as yours but then others may have.
Don
don
ModeratorRe: Vorwerk Kobold VK130/1 Vacuum Cleaner
Vorwerk is a little known German made cleaner which used to be sold by agents on a commission basis.
That said there are a few online sellers nowadays but the service does seem rather sporadic. The only UK lead I can find would be to phone 0333 014 3333 for a user manual and support.
Don
don
ModeratorRe: cooker hood fan
Hi
Make and model number would help please.
Don
don
ModeratorRe: New washing machine advice
kaibart wrote:The beko washing machines do a 40°c wash in 58 minutes as Martin has said these are great value for money
The previous post originates from Sri Lanka the IP address suggests it’s a well known spam and hacker address . I will keep an eye on the user just in case 😉
Don
don
ModeratorRe: Apelson Oven | AOMM60SS | Thermostat Stuck ON
electrofix wrote:if you would like to make a donation to any cancer charity for the help given, that would please me
I am fairly sure admin will have no objection to thisDave
Good shout Dave 🙂
Don
don
ModeratorRe: Apelson Oven | AOMM60SS | Thermostat Stuck ON
WhiteGoodsMatter wrote:Thanks for the quick reply Dave. Pity you guys don’t stock the part or would have ordered from here. Do you have a way I can donate?
You can try our own shop send an email to spares@ukwhitegoods.co.uk or hit the “shop now” green tab on the right.
Don
don
ModeratorRe: Bush cooker BES50B
I have it from the horses mouth the oven selector switch is 40514 😉
Don
don
ModeratorRe: Bush cooker BES50B
Hi
Position number on the attached and I’ll get you the part number.
Don
don
ModeratorRe: AEG Lavamat turbo protex – help finding NTC Sensor
Hi
The attached explosion might help i your quest. The NTC is position 470.
Trouble is unless you have worked on one you are not going to know. These AEG washer dryers are not that high in volume which is probably why there has been no responses so far.
Don
don
ModeratorRe: Washer dryer for single person
Hi
Taking your budget and requirements into consideration you are not going to better a Hotpoint.
That aside could you not at this stage get a better washing machine like a half decent Bosch and add a dryer later?
Don
don
ModeratorRe: Oven Timer
Hi
One on Ebay for your model brand new as well by the description https://www.ebay.co.uk/itm/Neff-0060274 … 2105237615
Don
don
ModeratorRe: Basic, Simple Washing Machine
Hi
Your sizes are pretty much standard.
I would take a look at the Beko WTG620M1W. It’s as basic as you can get at a fair price, spares are reasonably priced as well.
The other choice in my book would be the Bosch WAB28161 better build with a two year warranty, spares are a little higher priced but worth the extra you pay for the machine.
HTH 🙂
Don
don
ModeratorRe: New Bosch WAN24100GB No fab cond smell at end
I had this a while ago with a customer. If I remember correctly these models like most other Bosch machines take the conditioner at the start of the cycle according to Bosch technical.
One way to check is to carefully open the detergent drawer early into the wash cycle to see if this is the case.
We suggested an extra rinse and spin after the wash cycle with a small amount of conditioner which seemed to do the trick.
Don
don
ModeratorRe: Zanussi zhq575w
Hi
Main oven stat 3890770088
Fan oven element 3116448006
Edited your post to include Zanussi 😉
Don
don
ModeratorRe: Leisure GRB6GVC_CR Ignitor problem.
Hi
Sadly we are unable to advise on gas DIY repairs forum rules here explain the reasons.
You will need a Gas Safe engineer to carry out this type of repair. You can source one from our own network of engineers here if you don’t know of one.
Thanks for understanding.
Don
-
AuthorPosts
