eastlmark

Forum Replies Created

Viewing 15 posts - 1,591 through 1,605 (of 4,480 total)
  • Author
    Posts
  • in reply to: smeg a1-2 #316355
    eastlmark
    Moderator

    Re: smeg a1-2

    931330815 is the part number. The customer will have 2 pins to lock the hinges in the door open position for removal. 2 allen keys will do but these are nasty hinges, especially locking the new ones for re fitting. Usually need to use sole of boot to open them up enough to slot the pins in.

    in reply to: Repaircare in BTCC #316146
    eastlmark
    Moderator

    Re: Repaircare in BTCC

    All you repaircare agents should be in for some race track hospitatlity then!

    in reply to: The Martin Enigma #268535
    eastlmark
    Moderator

    kwatt wrote:

    Also noted, no disabled access. Sorry, couldn’t help it. 😉

    K.

    but, just outside:


    address still on his website Don.

    in reply to: The Martin Enigma #268532
    eastlmark
    Moderator

    Re: The Martin Enigma

    do you dare me?

    very tidy for an appliance engineer…..

    eastlmark
    Moderator

    Re: Google Street View – now UK wide…. show your shop….

    chezza wrote:

    eastlmark wrote:
    my former shop……. eh Chezza!

    I feel really old right now 😉 I can still see the old comma van parked up there ,

    you can still see the oil drips from it!

    eastlmark
    Moderator

    Re: Google Street View – now UK wide…. show your shop….

    and what about this dodgy looking bunch of dealers!
    😆

    eastlmark
    Moderator

    Re: Google Street View – now UK wide…. show your shop….

    my former shop……. eh Chezza!

    in reply to: USB Record Decks #315535
    eastlmark
    Moderator

    Re: USB Record Decks

    I played around a few years back with my turntable and a USB adaptor. That too used Audicity (whatever) but the level recorded was too low and whatever I tried I couldnt make it any better. The software was very difficult to use for those not with a degree in studio engineering. Never even got around to seperating the tracks or anything and just gave up.
    a few months ago, a friend bought one of those turntables with a usb socket and they recorded a couple of albums for me. Again using audiowhatsit. No problem with the level but the sound quality was very poor-something I put down to the poor quality of the turntable/cartridge and stylus. So once again I have given up trying to digitilise the 1000 odd albums taking up a whole wall in my office.

    in reply to: Soup Dragons #315954
    eastlmark
    Moderator

    helo_75 wrote:
    pure class

    no way, by this time, desperate for a record company pleasing hit single, they had cashed in on the indie/dnance crossover style of the Mondays and the Roses and I think even coined the much joked about phrase that “we always had a dance element to our music”
    Much better was the earlier “this is our art” album which should have made them huge at the time….it flopped.

    in reply to: Soup Dragons #315951
    eastlmark
    Moderator

    Re: Soup Dragons

    You have to be either an under ten a long time ago or a granparent with lots of time on your hands to understand where Bill is coming from Martin 😆

    Don
    or even an 80’s indie kid.
    http://www.youtube.com/watch?v=HpRoqq8-Uxs

    in reply to: DIPLOMAT/SMEG DISHWASHER ADP8252 #315888
    eastlmark
    Moderator

    Re: DIPLOMAT/SMEG DISHWASHER ADP8252

    is it under a draining board? Maybe excess spillages of water are getting into it?

    in reply to: Baumatic dishwasher error code #315386
    eastlmark
    Moderator

    Re: Baumatic dishwasher error code

    Model number?

    in reply to: honesty doesnt pay #315270
    eastlmark
    Moderator

    Re: honesty doesnt pay

    should have charged the customer at the time. Send them an invoice now with a polite covering letter expaining the problem.

    in reply to: clarify wd12 indesit w dryer #315040
    eastlmark
    Moderator

    Re: clarify wd12 indesit w dryer

    adv wrote:hi guys got this machine, flashing 13 times. picked up fault code sheet from supplier.sayin f13 is a water supply fault, on none lcd machines an f13 on lcd machines this code means dryer heater senser. is this correct? 😆 ?

    why do you need “to pick up a fault code sheet” from a supplier when you have them here?

    in reply to: Merloni price raises… #315269
    eastlmark
    Moderator

    Re: Merloni price raises…

    quoted someone for a door glass on a cooker from my laptop which has not been updated and price was £85 odd (cannot remember exact amount) came back to office to order and updated price was 51.06. so its not all upward price changes. C00228964

Viewing 15 posts - 1,591 through 1,605 (of 4,480 total)