Forum Replies Created
-
Posts
-
Re: Integrated Washing Machine or Washer Dryer
Just to add, whatever you go for ensure it is properly installed. Make sure your kitchen flooring extends right under the machine and it is not propped up on odd bits of wood. keep the appliance feet as short as possible. These are heavy appliances and need a good stable surface and will need to be removed at some point in their life so make sure that can be done with minimum fuss.
Re: Integrated Washing Machine or Washer Dryer
noumenon wrote:
eastlmark wrote:
Is that the same as the actual smeg washer dryer too? Isn’t that the one with the 1600 spin nad vibration issues?
Thanks.
It is the same machine. We dont get so many vibration issues with them now though and i am sure a big respected name such as Siemens wouldnt put their name on it if there were any major issues though. it does come with a stainless steel tub and cast bearing assembly though while the other models you have listed are plastic tubs as will be the Hoover/Candy model that someone else mentioned.
Re: Integrated Washing Machine or Washer Dryer
suedehead1 wrote:i hear those nice men at hoover have built in washing machine hwb 280 for about £500 and built in washer dryer hdb 284 for about £510.
i would put them somewhere between entry level and flagship.
i would put them somewhere between entry level and the scrapyard.
Re: Integrated Washing Machine or Washer Dryer
Within each group, these are all the same machines with different names on them.
The washer drier is produced by SMEG in Italy. Only go for the washer drier if you really need one.Re: Executive Decision
Really want to do this Ken but cannot commit as yet to somethng more than 6 months down the line.
Re: diplomat dishwasher adp 8224
818730381 THERMOSTAT BLACK 4 TAG 1
but also check for poor joints on heater relay on module.Re: diplomat/servis
718001800 BACK PLATE INC BEARINGS apm8512 1
236000400 Z1 DRUM SPIDER not recommended! 1
720090100 DRUM + SPIDER ASSEMBLY far easier! 1
718012200 BACKPLATE INCLUDING BEARINGS apm8512/1Re: Welcome To The War Room
kwatt wrote:If you read this you pretty much know what it’s about.
The people that have currently have access here are listed below, I think we all know one another well enough;
Dave Conway
Kenneth Watt
Sean Delaney
Alex Reed
Phil Dill
Martin Russell
John McKenzie
Kevin Morrissey
Chris Chantrell
Bryan Williams
Greg (Gegsy)And that’s it! No rules here, speak your mind and use whatever foul language you like in this one. 😆
K.
You bastards! You have been here for 3 years and I never even heard a whisper about it! 😈
you did say speak you mind.
Re: Appliances on “stand by”
Thing is, those old machines didnt draw any power when left on anyway, aside form maybe a mains on neon, unlike those today…..
Re: wpl awm8123
I have looked at the diagram nothing really latches that description. a bit more detail maybe?
Re: smeg slimline dishwasher dead
If there are no lights but the board has 230v then the module it will be. Bet the customer leaves it turned on 24/7…..
Re: diplomat dishwasher adp 8224
No error code? and “sticks on prog” is not a helpful report of the symptoms. Give a bit more detail and maybe you will get a few more responses.
Re: MIELE PARTS
spanner51 wrote:You could ring Miele direct 01235 233133. They usually give 15{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} to trade customers.
Rubbish! Unless you are one of their service agents you get zilch!
Re: WMA – can’t get belt on?
Cable tie method usually works everytime for me Martin. take the top weight off for better, less scratchy access. Could aways take the tub out i suppose, its easy to slip them on then!
