Forum Replies Created
-
Posts
-
Re: SMEG DWF1 – Odd Salt problem?
Is the salt in the container going down? As you have recently topped it up, remove the cap after a few washes and the level should have gone down, if not then it may be a regeneration valve problem or even the electronic control.
Those symptoms can also be caused by the spray arms being blocked (remove them and shake out any large bits through the central hole) or cheap detergent or rinse aid.Re: Fault Codes on AEG Lavamat 74335
well 2 of us both came up with E34 so I guess we must be doing something right!
get yourself the TDS disc p/n 5 0600 60 65-00/3 only £20 and its all on there.Re: The Mind Reader
that is weird. If you dont do the sum it doesnt work. I havnt put the mouse anywhere near the answer either….
Re: Bosch d/w heater failures
Penguin45 wrote:Possibly linked to the new style water level control system, Mark. Can it underfill as well as over?
Chris.
No, these are all still the float in the side type rather than the quriky software/reed float types.
Re: Fault Codes on AEG Lavamat 74335
From what i can gather, that would be E34.
quote:Incongruance between pressure sensor and antiboil level 2. ❓
Have you TDS off line? the fault codes are on there.
Re: Bosch d/w heater failures
yep, i mean the heater itself as the newer pcb’s dont suffer the dry joint problem 😥 . They have all been open circuit failures. the worse thing is that there are at least 3 different types and are pricey too so keeping a van stock is expensive.
they have been:266196 £45.13
266197 £45.13
and today,483058 at £62.00
yet the original version of these machines, now 6-8 years or so old hardly ever suffered a heater failure. reckon they are made of the same stuff as the fan elements.Re: PC restore?
If you are on XP why not try a system restore to a date point just before the said Rep did the damage. got to be worth a try.
Re: Bosch burning!
ring any bells?
http://www.ukwhitegoods.co.uk/modules.p … highlight=Re: Neff fan oven elements
Just recieved a consignement of elements from BSH today and they are still 493065’s Seem us mere trade accounts are using up the old stock.
Re: Brant d/w & washing up liquid
I used to use the bar of soap method but in todays kitchens they are very hard to find now with all that new fangled liquid stuff. (which doesnt work at all)
Re: How long do you give yourself for a job in a customers h
..and dont you just love it when they multiply the “5 minutes” (its always 5 minutes, regardless) you took to repair their machine by 12 and then by 8 and then declare that you earn like £4800 a day! :clown:
Re: Neff fan oven elements
Fitted a new fan motor to one of these today and notcied the fan has now got a ring of holes in it which are new, not seen one like that before anyhow. Maybe some connection with the life of the elements? Mind you the fan motors are not that reliable either.
