Forum Replies Created
-
Posts
-
Re: How long do you give yourself for a job in a customers h
we used to get a lot of them complaints, I used to tell the customer that next time ask for the doddery old engineer that farts about for an hour trying this, that and the other before deciding it was the brushes all along. Then I would turn up!
Re: UKW meeting is soon, who’s going?
Martin wrote:What’s this? Another thread about a thread?
No its just an informal thang to see who we may be meeting as screen names cannot always be matched wiith faces at the time, as you found out Martin with Iodom last time.
Martin, thought you werent coming anyway.Re: Diplomat / Hygena app 2410 cooker hood
look above the hood, there is often a 3 pin plug and socket on top of the kitchen cupboards. No one can ever find them. Ensure any replacement fuse is either a 3 or 5amp, if the fitter used a 13 amp fuse it will probably mean the switch, as above, is blown instead of the fuse.
Re: where is it
Its inside the drum, often tricky to remove. would probably recommend you seek expert advice. Plug out before removing any panels.
Re: electra reversair deluxe tumble dryer 37468 Hinge proble
yoyu have to slide it out either up or down I cannot remember, sometimes gets a slight rust covering which makes it more tricky.
Re: part no’s please
Partcentre list theBelling elelment at £29.34. there is a pic on their site too.
Re: Brant d/w & washing up liquid
Check the heater for earth faults, causes all sorts of odd faults on this one, also the door lock could be at fault. Cannot look up part number as Connect has messed up the Brandt part look up on Mediator on line and most of the common models are not there.
Re: Magnetic pump design.
Good question, the 2007 is more than twice the cost of the other. The usual difference between the older screw on askoll’s was that some had cut outs on and some didnt. Maybe its the same with these square, twist on ones. (that are easy to break when un-twisting by the way)
Re: Solarplus grills
The only problem with the solar plus grills are the expensive replacement cost when they fail. Same with the halogen rings.
Dont know of a solar type grill on a Bosch but the fan oven elements have a tendency to fail and the genuine replacement is not cheap. Having said that, most fan ovens seem to be having a high failure rate of elements these days.Re: Why?
Martin wrote:
eastlmark wrote:
Why…. has the Meeting with DASA not been metnioned on UKW?Here for your delight is a link to the latest from the recent DASA Meeting :-
Hey Martin, didnt realise you attended as well!
Re: AEG D/waser FAV667 Water in Base
clivejameson wrote:
Dave_Conway wrote:
The hose (I’m not sure if it comes with the chamber) is 8996460683007
Dave.
Yes, it does indeed come with it along with new jubilees to fit it, and a bung or two for holes in the chamber that may not be required. It also includes a couple of new clips for the clear softener feed hose that runs underneath.
All in all not too bad a job….just be a little careful about deciding where to cut the old chamber off.
He might mean the hose from the watersoftner to the air break which the old one is always just too short to be safe, i used to use the old zanussi washcraft dispenser valve hose (a useful piece of hose as it could be bent through all angle without kinking) but that is now over the top price wise.
