eastlmark

Forum Replies Created

Viewing 15 posts - 841 through 855 (of 4,480 total)
  • Author
    Posts
  • in reply to: Bosch FD8067 FF icemaker wont empty #378804
    eastlmark
    Moderator

    Re: Bosch FD8067 FF icemaker wont empty

    not sure if it will effect the ice maker or not but had loads of evaporator fan motors fail on this model. push the freezer door swtich in and make sure the fan starts up in a few seconds.

    in reply to: Bosch FD8067 FF icemaker wont empty #378802
    eastlmark
    Moderator

    Re: Bosch FD8067 FF icemaker wont empty

    no experience on that one but there is normally a mould heater that allows the cubes to release.

    in reply to: Bosch FD8067 FF icemaker wont empty #378800
    eastlmark
    Moderator

    Re: Bosch FD8067 FF icemaker wont empty

    you have given us the date code, a model number would be more helpfull.

    in reply to: Admiral top loader #378786
    eastlmark
    Moderator

    Re: Admiral top loader

    look it up here:

    http://www.partadvantage.com/

    in reply to: Smeg S20XMF Grill element #378711
    eastlmark
    Moderator

    Re: Smeg S20XMF Grill element

    lower element 806890580
    grill 806890438

    in reply to: Caple slimline dishwasher DI453 wash motor stuttering #378610
    eastlmark
    Moderator

    Re: Caple slimline dishwasher DI453 wash motor stuttering

    smeg I assume? therefore could be anything from mains fliter to pcb via soap dispenser. Would suggest hooking up a voltmeter to the circ pump direct to check if feed is constant or not, then at least it will eliminate the pump itself if its not constant.

    in reply to: Did you ever…. ??? #378615
    eastlmark
    Moderator

    Re: Did you ever…. ???

    bit of debor should sort it.

    nice to hear from you again. Keep looking out for you on Bank of Dave!

    in reply to: Whirlpool D/F stat FRSS22236AF20/2A #378366
    eastlmark
    Moderator

    Re: Whirlpool D/F stat FRSS22236AF20/2A

    daisbiz wrote:Thermostat bimetal ,pos num 562-0,4812 282 08646.858619015011.

    looking at the exploded, that part looks more like the compressor cut out….

    these things are an absolute minefield. I have 3 on my van and still they never seem to fit. some look identicle apart from 2 of the pins in the plug being female which prevents the plug fitting.
    its possibly 481232128482 but dont count on it.

    in reply to: Zanussi ZWD12270W 914604000/00 #378552
    eastlmark
    Moderator

    Re: Zanussi ZWD12270W 914604000/00

    disconnect the dry element. A tiny earth leak will cause this.

    in reply to: DW Hose Clips #378550
    eastlmark
    Moderator

    Re: DW Hose Clips

    pegasusk7 wrote:I’m replacing a circ pump mtr on a dishwasher with the crimped on style hose clips. What do others use to replace them? Proper jubilee clips are too wide and I wouldn’t trust tie wraps.

    Phil


    order up the correct clips for the job along with the motor.

    eastlmark
    Moderator

    Re: belling all electric range cooker MOD.130WBU..S.NO..8810

    maybe a door switch on the grill hinge on that one? just a guess really.

    in reply to: Zanussi Foamed in Sensor? #378511
    eastlmark
    Moderator

    Re: Zanussi Foamed in Sensor?

    let me know your email address, will send you some interesting reading.

    in reply to: Hyde Park jobsworth ruined my City Break #378277
    eastlmark
    Moderator

    Re: Hyde Park jobsworth ruined my City Break

    DrDill wrote:Genesis wouldnt be very good with out Phil,

    true…..had he stayed behind his drum kit.
    they shoud have called it a day after TLLDOB.

    in reply to: Blank knob.??? #378450
    eastlmark
    Moderator

    Re: Blank knob.???

    perhaps you need a smart card to program it.:D

    in reply to: Maytag RCW2000DAB drain tray #378369
    eastlmark
    Moderator

    Re: Maytag RCW2000DAB drain tray

    possibly 53523-2

    you can use this site to look up maytag part numbers:
    http://www.partadvantage.com

Viewing 15 posts - 841 through 855 (of 4,480 total)