Forum Replies Created
-
AuthorPosts
-
January 31, 2012 at 10:21 pm in reply to: Help! need replacement partno for H/P EW93T halogen hobplate #368164
eastlmark
ModeratorRe: Help! need replacement partno for H/P EW93T halogen hobp
probably just old stock being run out. Halogen has had its day, most replacements are now fast ceramic, have to explain to customer the advantages…..
eastlmark
ModeratorRe: AEG SUMP HOSE REQUIRED
distripart have it in stock.
eastlmark
ModeratorRe: smeg sc436x-8 control panel
5M373A790 is the correct number
eastlmark
ModeratorRe: connect: cost of parts to publc
Allsorts wrote:One example:
Qualtex offer 062057004 at £19.58 + vat … a lot better than Connect
Qualtex also do a pattern version of that element at only £4.79 + vat.George
you fail to mention its (the Gen one) a special order though….
and I always go for genuine elements with few exceptions.
In realiity, its unlikeley I would have sourced that part myself from connect, I only posted it as a like for like price comparison from the same company trade-public.eastlmark
ModeratorRe: ISE 10 suspension unit change?
that’ll be the same man who pulls the inner drum out with ease once the rear pulley is off…..the reality of forcing a drum shaft through 2 equal size bearings is somewhat different.
eastlmark
ModeratorRe: Zanussi Grill cavity repair kit part number
I think the part code is: AFATTERSCREW 😀
eastlmark
ModeratorRe: Carbon brushes needed 0 Whirlpool washing machine
washer drier? It will be a smeg. pretty standard motors fitted to these but might need the motor make, wont be difficult to find. most likely side tagged CESET type? CBN9041. Could well have an alternative motor fitted though.
eastlmark
ModeratorRe: ISE 10 suspension unit change?
must admit to having never changed one. Would have thought possible without drum removal.
eastlmark
ModeratorRe: smeg dwi45.1 how old?
need serial number should be:
This chart contains the following data:
1. Commercial model
2. Production date
3. Progressive number of production
4. Production decade
The field number 2 “Production date” is to be read together with field number 4 “
The field n° 2 ” Date of production ” has to be read together with the filed n° 4 “Production Decade ” in
the standard format aammgg. Thus the above mentioned serial number refers to a product produced
on 29th March 2004.
The field number 3 indicates a number which is created on purpose for every production line and does
not have anything to do with the production date.eastlmark
ModeratorRe: lokring fitings
Qualtex, some examples:
DR10 dryer qualtex price 3.05 connect 6.79
5/5 connector qualtex 2.01 connect 3.87
use the suffix VUL to search.eastlmark
ModeratorRe: Football season 2011/2012
Even hard man Jimbo must sympathise with spurs fans over that loss. A hard one to stomach. Given the penalty was awarded during the added time due to Scott parker being assaulted by a MC thug was the most gruelling part of it.
And Arsenal loosing to MU didnt do us any favors either!eastlmark
ModeratorRe: AMANA AC2224GEKB
if it were a faulty compressor or starter, the condenser fan would still run. I do have a wiring diagram if that helps?
eastlmark
ModeratorRe: Gaggenau microwave H95 fault.
dont know about the warranty but this guy on Ebay does the invertors and mags for peanuts, god knows where he gets them from.
eastlmark
ModeratorRe: Miele WT2670 Cant get in it!!!!
front off and then side panels.
single bolt at 6 oclock under door, pull off kick strip (maybe retained by 2 screws under caps) undo the 2 outer screws under the front lip of front now exposed once kick strip is removed. Carefully push down front panel to remove ITs Heavey!
screws down the front of each side panel can now be seen, revmove lid (2 screws under caps on the side towards the front and 2 at rear), more side panel screws at rear and along top under the lid, and sides then fall off.would imagine that will have a moulded mains terminal affair though £££
eastlmark
ModeratorRe: Gaggenau microwave H95 fault.
dont know the code but as its an invertor model its usually both the mag and invertor to be safe.
-
AuthorPosts
