Forum Replies Created
-
Posts
-
Re: ISE condensor dryer cd601w back panel replacement
Lay on front and remove all screws paying attention to which type of screw goes where.
Then lifts off.
One screw holds a plastic clip which secures a hose to the back plate
Not difficult.
Looks like you will need the bearing as wellSteve
Re: Flying tonight. 🙂
Mine has now been limited to 50 Mbps but I could still download a movie in 4 minutes if I ever got the urge. 8)
Steve
Re: Public liability insurance what do you pay
Direct Line £79.70.
I worker (Me)
Employer liability (Not required)
Public liability £2m
Excluding processes involving application of heat
Excess £250Steve
Re: IOT enabled Engineers
Right now I am setting my first new smart TV and whilst I am impressed by the technical spec I can’t help thinking “Does anyone actually use all this stuff just to watch TV and movies?”
Good practice though for when I encounter my first smart fridge.
Steve.
Re: Capsule Coffee Machine
Given that these capsules are non recylable it is my opinion that nobody should be using these machines and if the government follows the German lead then they could be banned.
http://www.bbc.co.uk/news/magazine-35605927
There are better ways to make coffee.
Steve.
Re: Temperature varies too much.
Make sure that the furniture door is not closing before the appliance door.
If the woodwork is making the appliance door stand slightly open the freezer will ice up.
Once iced up it will not be able to clear itself and will need a manual defrost as Bob says.Steve.
Re: how to repair website – who is he?
Paul Charmbury
Owner at http://www.how-to-repair.com
Portugal
Consumer ElectronicsCurrent md at yachtgrot, Owner at http://www.how-to-repair.com
Past M.D at http://www.apart4u.co.uk
Education lucton school Herefordshire, St johns chepstowThis is the man.
Steve
Re: Whirlpool S25DRSS33
Motor drops out through access panel underneath as far as I recall.
Odd sized hex screws also.Steve
Re: how and have i been lucky ?
Long time ago before the age of RCDs I had a call where the mains lead to the washer had been extended using a three pin in line rubber connector which I unplugged and got the shock of my life.
The customer had wired the live/neutral into the male pins.Lesson learned.
Steve.
Re: Whirlpool American Fridge Freezer broken down – help!
I have never done one myself as I outsource my pcb reworks and I don’t have one to hand to look at.
Steve.
Re: Samsung screws grrrr.
Weller soldering gun in the screw head for a minute then sharp tap on the end of the screwdriver might free them off.
Steve.
