[electrofix]

Re: Whirlpool 6340 – time to replace or continue to fix?

flashing lights is the power supply on the main pcb degrading with age not a hard fix to a professional did one before christmas but your leak may be unrelated

Dave

[electrofix]

Re: Bosch Classixx dishwasher water will not drain

poss a piece of glass or ceramic in pump

if you have a model number ( most at top of door on clear label on silver door inner) will try to point you in right direction

Dave

[electrofix]

Re: electrolux induction hob EHD72100x E6 error

have sent you some info

Dave

[electrofix]

Re: Dishwasher not heating

you need to find out what the fault is

it could be

1 the heater
2 themal cut out
3 programmer or wiring

gets expensive if you get it wrong

Dave

[electrofix]

Re: BEKO DRVS62 Wattage when drying

does not matter as long as it is regulating the temp inside the drum

Dave

[electrofix]

Re: flavel finess 100

am taking a guess here as i dont have correct model

did google search for finesse 100 came up with

http://www.flavelappliances.com/Item/FN10FR#features

will send you tech info on this model but cant guarentee its right

Dave

[electrofix]

Re: whirlpool ADG332 S WH

remove kitchen kick board

remove lower cover of dishwasher

if you find water in this area mop it out and try unit

remove plug before removing base

after water moped out try dishwasher with base open. look with a torch for leaks. if it stays dry turn off box it up and use it

float by ther way is a polystyrene disk in the base that operates a switch if water is present

Dave

[electrofix]

Re: Candy FL134WUK – lock removal

had a quick look but cant find anything

ring candy’s customer service if there is a simple fix they will tell you over the phone

Dave

[electrofix]

Re: How does the cold air get to the fridge from the freezer

if this is a frost free unit there are air ducts that take cold air from the freezer in to the fridge. there will also be a motorised flap to stop the fridge getting too cold controlled by the pcb
if you have stubborn ice up the tubes then 24 hours off time may not be enough. did you see any ice when you stripped it ?

Dave

[electrofix]

Re: Neff T40B30X2 induction hob

go to the neff site

download the owners manual which will include fitting instruction. this will advise on a suitable electrical connection

Dave

[electrofix]

Re: whirlpool ADG332 S WH

if the pump is not stoppingf then most likely the anti flood device has activted
there is a float in the base of the dishwasher this fault is most likely due to a leak flooding the base. remove this water and if there is no leak machine will work again. if there is a leak then fault will re-occur

Dave

[electrofix]

Re: Bosch dishwasher picks its moment

go to

http://www.bosch-home.co.uk/store/spareparts/search

pu your Enr in

you can see the pump at the bottom of diagram 2

you would have to open it and remove obstruction

Dave

[electrofix]

Re: AEG L86810 E33

you cant go by the heater warming up its the earth faults that upset the electronics
from what your saying unlessthe other fault code is serious change the heater

Dave

[electrofix]

Re: AEG L86810 E33

fault is listed with the following

pressure switch faulty, heater faulty to earth , heater fault . faulty wiring, blocked pressure chambers or main board
you have changed pressure switch, you can disconnect heater to eliminate earth faults. i dont think this machine knows if heater is open circuit so once disconnected you can ignor this fault, unless its a wiring fault, (remove and replace all connections on main board)
looks like you may have a main board fault
but cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain

Dave

[electrofix]

Re: flavel finess 100

have you got the model number ?

Dave

[Author]

Posts