Forum Replies Created
-
Posts
-
Re: Baumatic BDWI660 – element only ??
have you asked the site shop ?
as far as I know Baumatic owned by Candy now (unless I am wrong )
Dave
Re: bosch wae28363gb/05
in a nut shell
dial to 6 o clock
press and hold spin speed button
turn dial 1 click clockwise
release button
turn off and on againsome poeple say you have to disconnect motor for it to work not had that happen to me although you may have to repeat a few times for it to work
Dave
Re: AEG built in oven fault
two blue wires two white wires and a blue case
turns on the cooling fan
no cooling fan unit overheats and cuts out
Dave
Re: Lamona lan8652 – 7619333871 cant change sottener setting
have sent you some info for LAM8650 the closest number i can find to yours
cannot see yours on the beko sitehope it helps
Dave
Re: Fisher&paykel dd603h dishwasher f1
flood switch is in the board underneath the plastic cover at the back and should self reset when dry
Dave
Re: Hoover HNF2127-80 constant draining
from the sound of it the triac that controls the pump is short circuit on the pcb
simple swop if you can solder
Dave
Re: hotpoint hm31aaf no start… pcb repair?
yes quality is a bit low
but from what i can see looks like it part of the power supply to the board. what has gone wrong with this transformer ?
Dave
Re: Hotpoint WMUD942
does it pump the minute you plug in ?
the minute you turn it on ?
when you set a prog and start it ?or a couple of seconds or minutes after you start it ?
first thing i would check for
1 anything that looks like a fault code
2 earth faults in the pump circuit( dont get as much these days as it blows rcd but there are still properties without them )
3 shorted pump triac on pcbDave
Re: White Knight BG442/1 cutting out
from the diagram i have found this is quite a simple unit
following your description of the fault it seems the motor stops and it all switches off from there
as this motor is fed directly from the timer i can only assume the motor overheat protector is tripping which is part of the motor
Dave
Re: hotpoint hm31aaf no start… pcb repair?
how about posting a few pics of the part and where it fits. looked online myself but as yet cant find any info on what this part does and cannot find any pics of the pcb
Dave
Re: Lamona HJA8630 ON/OFF SWITCH
you need live on 2 wires and neutral on 2 wires (with the switch in the on position) for the unit to function
i would use a multimeter to check continuity of the switch with the power off
Dave
Re: Lamona HJA8630 ON/OFF SWITCH
just because a switch clicks does not mean it is working electrically
and when you say there is power to the switch what do you mean?
you need a live and neutral in and out the switch for the machine to work
DaveRe: Beko CDA660 fridge freezer intermittent circulation fan
i would say you are correct as there is no point haveing a fan running 24 hours a day it would make sense to switch it in with the compressor. you could do a continuity test to proove it
but my money would still be on the poss board capacitor
Dave
