[electrofix]

Re: Beko CDA660 fridge freezer intermittent circulation fan

there are 3 of these units with similar models but since you are mentioned a circuit board i would guess yours is CDA660FW

from the picture of the board there is a capacitor ( big blue block). this will provide the power to the board. change that first and see what happens cheap fix if it works and you cant loose a lot if it does not

from the picture looks like a 1uF

look in trade forum in the stickies at the top for pcb fixes its well documents by me and others

hope it helps

Dave

if you want the wiring diag, for what its worth, let me know but check full model no first

[electrofix]

Re: Electrolux Table Top Dishwasher ESL2435

possibly the triac cfor the inlet valve

have sent you a pm with more info

Dave

[electrofix]

Re: Lamona Dishwasher

salt and rinse light dont matter. its only a warning to refill but if you use all in 1 tablets you should not fill them

sound like something is caught in your pump. so the drain pump has to be opened to removed whatever it is. normally glass

Dave

[electrofix]

Re: BEKO 6837x error codes

you are sure there is water to the machine. dont trust the tap take hose off machine and check for good water flow

Dave

[electrofix]

Re: CDA washer mod ci393 ser TZ0106A00965

post a pic of the brush gear and motor

Dave

[electrofix]

Re: Beko fridge freezer CDA653fs/1

as far as I know its available but will check.

may take me a few days but will try to find the tech info

Dave

[electrofix]

Re: Amica washing machine AWP510L

it will depend on whats blown

does what has blown feed another component ?

try posting a pic

Dave

[electrofix]

Re: miele motor

have found a seller on ebay with a w865 motor. he does not list any part number but i have asked him for it

heres hoping, thanks for your help as miele info is hard to find

Dave

[electrofix]

Re: miele motor

model W524 serial 40/8567307

double checked old motor

MRT37 – 606/2
Teil 6636230 Nr 072585f
300-17000 1/min Is.KI.F

thanks

Dave

[electrofix]

Re: miele motor

motor i have is 6636230 mrt 37 606/2

when ci look up this motor from suppliers it comes up as a mrt36 motor

looked on ebay one supplier has a mrt37 motor with a part no of 4674086

if you look up mrt36 motors part no 3555993

there also a motor off a w865 looks like mrt36 unit but dont know part no

any help would be good thanks

Dave

[electrofix]

Re: Beko WM7127s not spinning

if the tracks were blown on the board then other components may be as well. if its the board I think it is mounted at the top right hand side. it has a bridge rectifier (square block with 4 legs) these can be tested with a multi meter. search Google on how to test

Dave

[electrofix]

Re: BEKO 6837x error codes

cannot find your model but on the one i looked at ER2 is no water

Dave

[electrofix]

Re: miele motor

there is a part number on the motors but even though the motor says mrt37 the part numbers differ

Dave

[electrofix]

Re: ADG 7560/1 – Refitting decor door tips

a pair of pincers is all you will need like the attached file

Dave

[electrofix]

Re: ADG 7560/1 – Refitting decor door tips

the door is held on by 4 of the door screws

from memory its screws 2 and 4 from the bottom but if you look at the square holes in the door only 4 screws line up
loosen these screws. offer the outer door up to the holes and lift to lock it. then carefully open the door whilst holding it in position. then lock the screws

if all went well its fitted

Dave

[Author]

Posts