electrofix

Forum Replies Created

Viewing 15 posts - 18,526 through 18,540 (of 19,550 total)
  • Author
    Posts
  • in reply to: baumatic integrated BDW5 Blockage #355565
    electrofix
    Moderator

    Re: baumatic integrated BDW5 Blockage

    its like most problems it can be a few things

    it can be
    blockages in the pipe havehad people put grease down the sink and block the drain hose into the sink so. if its this you will hear the pump when the dishwasher starts and if your holding the outlet hose when you cdo you will feel it expand with the pressure easy fix remove the pipe and dislodge the grease
    it can be the pump jammed ( Glass, chicken bones, crockery etc) more difficult fix as you will have to locate pump and take it apart to remove blockage. cant remember ir you can do this without taking diswasher out of housing

    Dave

    in reply to: Bosch Cooker Glass top of hob unstuck #355630
    electrofix
    Moderator

    Re: Bosch Cooker Glass top of hob unstuck

    its either something broken or its been glued

    if it looks as if it has been glued down there is a high temp silicone used for the inner glass on oven doors but you would have to take the top off to glue it

    Dave

    electrofix
    Moderator

    Re: BAUMATIC BC187CSS Cooker with no temp/setting indicators

    try

    http://files.baumatic.com/usermanuals-u … 241208.pdf

    this is the owners manual seem to have a good drawring of front. cant see you model but a lot seem to be the same this is from B187bl range

    if this is not right one go to

    http://www.baumatic.co.uk/built-in_ovens.html

    and look for you model

    Dave

    in reply to: AEG Lavamat 76810 E70 #355599
    electrofix
    Moderator

    Re: AEG Lavamat 76810 E70

    ntc

    20 degrees
    nominal val 6050 ohm
    max 6335 ohm
    min 5765 ohm

    60 degree
    nominal 1250 ohm
    max 1278 ohm
    min 1222 ohm

    80 degrees
    nominal 640 ohm
    max 620 ohm
    min 660 ohm

    always worth looking for dry joint and bad connectors

    Dave

    in reply to: Whirlpool S20DRBB32-A/G #355626
    electrofix
    Moderator

    Re: Whirlpool S20DRBB32-A/G

    long shot

    have you tried a different socket
    ie bad socket = arcing = computer board lockups

    Dave

    in reply to: AEG Lavamat 76810 E70 #355596
    electrofix
    Moderator

    Re: AEG Lavamat 76810 E70

    there are 2 codes in the 70 range (7 beeps just means 70)

    it could be either

    E71 NTC sensor for wash cycle defective
    E74 NTC sensor for wash cycle improperly positioned

    what they both come down to is

    ntc faulty
    wires to the ntc faulty
    main pcb faulty

    its one of those i would think
    does not mention motor in the tech blurb

    hope this helps

    Dave

    in reply to: CANDY GO682 #355645
    electrofix
    Moderator

    Re: CANDY GO682

    sound like the rotary switch gone its not unusual and not to expensive

    Dave

    in reply to: How to change a motor in Lancashire #355634
    electrofix
    Moderator

    Re: How to change a motor in Lancashire

    i notice he did not show how to change a motor in the later hotpoint or an old Miele lol

    Dave

    in reply to: EURO MILLIONS #355635
    electrofix
    Moderator

    Re: EURO MILLIONS

    if it is you there is an unwritten clause of this website and i quote

    ” Any member who wins any lottery prize in excess of £10,000 has to donate 20{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of their winnings to the site for distrbution to is members. The management reserve the right to charge an administration fee of 2{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} to cover expenses ”

    so if its you we will be watching !!

    lol

    Dave

    in reply to: Ebay idiot #355611
    electrofix
    Moderator

    Re: Ebay idiot

    he does not say this board is shoe horned in and is a not easy to get out

    Dave

    in reply to: Possible PCB Repair? #355324
    electrofix
    Moderator

    Re: Possible PCB Repair?

    this should help

    http://www.heilind.com/products/omron/P … uation.pdf

    Dave

    in reply to: AEGF35080V1 NO HEAT #355561
    electrofix
    Moderator

    Re: AEGF35080V1 NO HEAT

    see i did not check just assumed that will teach me lol

    have got service manuals for F35085V1 pnc 91193922200 or 91193922201 or 91193960300

    if it helps let me know Dave

    in reply to: AEGF35080V1 NO HEAT #355559
    electrofix
    Moderator

    Re: AEGF35080V1 NO HEAT

    you have to ask yourself is this a fault of the machine or customer perception. yes it could be a fault heater relay would be my first call but ntc and wiring problems feature high as well
    could also be the customer. does this machine have a double glazed door? Had a few customers who could not feel heat and coupled with the fact the clothes came out cold at the end of the wash assumed it was not heating

    Dave

    in reply to: Zanussi FL 1034 not heating #355331
    electrofix
    Moderator

    Re: Zanussi FL 1034 not heating

    glad you found it

    its a nice feeling when you find a fault like that

    Dave

    in reply to: Possible PCB Repair? #355317
    electrofix
    Moderator

    Re: Possible PCB Repair?

    i use either

    http://uk.rs-online.com

    or

    farnell.co.uk

    somewhere on the relay it will give a coil voltage and contact rating

    Dave

Viewing 15 posts - 18,526 through 18,540 (of 19,550 total)